* lisp/org.el (org-mode): Set `comment-start' instead of changing the
syntax of the `#' character.
Leo writes:
> Setting a comment starter without a corresponding comment ender is
> problematic and the # creeps in mysteriously under auto-fill. For
> example, in my current running emacs, this happens almost certainly in
> all org files that has # in their header. The only (temporary) solution
> seems to reboot emacs (which is painful and disruptive).
>
> If you try eval (forward-comment 1) at the beginning of an org file that
> has some "#+..." it will move to the end of file (the whole file is
> regarded as one single comment). So when auto-fill a long text, it will
> find the common prefix to be #.
>
> In addition, I don't think org mode has clear comment syntax or ideas on
> what to do with it.
>
> I can't see any gain from (modify-syntax-entry ?# "<") so I am proposing
> removing it entirely and get rid of this mysterious and annoying bug
> once and for all.
>
> The attached patch may (though I think it is quite safe) cause some bugs
> but those will be fixable unlike the one mentioned above.
>
> Best wishes,
>
> Leo
* lisp/org-exp.el (org-export-format-source-code-or-example): Mark examples
by a property. o
* lisp/org-html.el (org-export-html-close-lists-maybe): Check if raw
HTML stuff was actually made from an example
Daniel Mahler writes:
> 2. I would like to embed source blocks in numbered lists, without
> breaking the numbering ie:
>
> 1) get ready
> #+BEGIN_SRC sh
> get_ready
> #+END_SRC
> 2) go
> #+BEGIN_SRC sh
> go
> #+END_SRC
>
> currently the src blocks cause the numbering to reset, so all
> items in a sequence like this are numbered 1
This patch fixes this issue - but I cannot say anymore why the code in
org-export-html-close-lists-maybe does in fact work. The code looks
wrong, but it seems to work. What looks wrong is that i does not
check for the true indentation in the case when the line is not
protected. It must be that this case is covered by some other code
further down in the exporter.
* lisp/babel/ob.el (org-babel-src-block-regexp):
ensure no whitespace in language names
(org-babel-inline-src-block-regexp):
ensure no whitespace in language names
- Removed the org-babel-tangle-langs variable.
- Added the org-babel-tangle-lang-exts alist for associating
languages with file extensions
- Comments now only added when the :comments header argument is set
to yes
* lisp/babel/ob-tangle.el (org-babel-tangle-w-comments):
this is now a defcustom
(org-babel-tangle-lang-exts): alist associating languages with file
extension, this is also a defcustom
(org-babel-spec-to-string): no longer using the complex tangle-lang
variables
* lisp/babel/ob.el (org-babel-interpreters): define this before it is
first used
* lisp/babel/ob.el (org-babel-call-process-region-original): define
this before it is first used
* lisp/babel/ob.el (org-babel-execute-src-block):
call-process-region-original is no longer free
(org-babel-org-babel-call-process-region-original):
call-process-region-original is no longer free and is now renamed
org-babel-call-process-region-original
(org-babel-tramp-handle-call-process-region):
call-process-region-original is no longer free
* lisp/babel/ob.el (org-babel-execute-src-block): now passing
additional optional argument to `org-babel-inert-results'
(org-babel-insert-result): now accepting additional language
variable
* lisp/babel/ob-comint.el (org-babel-comint-with-output):
Fixed egregious oversight in which we were assuming that the
`full-body' variable would be in scope at the time of macro
execution. Thanks to the compiler for finding this bug.
* lisp/babel/langs/ob-R.el (org-babel-R-evaluate): now using the fixed
`org-babel-comint-with-output' macro
* lisp/babel/langs/ob-haskell.el (org-babel-execute:haskell): now
using the fixed `org-babel-comint-with-output' macro
* lisp/babel/langs/ob-ocaml.el (org-babel-execute:ocaml): now using
the fixed `org-babel-comint-with-output' macro
* lisp/babel/langs/ob-octave.el (org-babel-octave-evaluate-session):
now using the fixed `org-babel-comint-with-output' macro
* lisp/babel/langs/ob-python.el (org-babel-python-evaluate): now using
the fixed `org-babel-comint-with-output' macro
* lisp/babel/langs/ob-ruby.el (org-babel-ruby-evaluate): now using the
fixed `org-babel-comint-with-output' macro
* lisp/babel/langs/ob-sh.el (org-babel-sh-evaluate): now using the
fixed `org-babel-comint-with-output' macro
we are keeping two things in the contrib directory
1) the library-of-babel.org file, this is with the goal of lowering
the barrier of entry for contribution of functions to the library
of babel
2) we are also keeping a langs directory in the contrib directory
because some language files do not have FSF copyright assignment
-- current org-babel-oz.el is the only such file
* lisp/org-latex.el: items are no longer skipped when their first line
ends on a protected element.
* lisp/org-list.el: protected environments looking like lists are not
exported anymore.
Thanks to Nicolas Goaziou <n.goaziou@gmail.com> for this patch.
* lisp/org-exp.el: comment regexp now matches documentation. No more
protection check when deleting comments before export.
Thanks to Nicolas Goaziou <n.goaziou@gmail.com> for this patch.
* lisp/org-exp.el (org-export-preprocess-string):
now using `org-export-handle-include-files-recurse' to resolve
included files
(org-export-handle-include-files): now returns a list of the
included files
(org-export-handle-include-files-recurse): recursively calls
`org-export-handle-include-files' while checking to see if the
process has entered an infinite loop.
Thanks to Eric Schulte for this patch.
(org-agenda-get-scheduled):
* lisp/org.el (org-time-string-to-seconds):
For deadline and scheduled agenda display ignore the cyclic repeater
when calculating how many days late the task is. If you have a weekly
task and miss the date the agenda view will show more than a week late
now instead of resetting on the cyclic repeating date. This makes it
much more obvious when you missed a repeating task after the repeater.
Thanks to Bernt Hansen for this patch.
* org.el (org-raise-scripts): Do not fontify sub/superscripts of text
with face `org-special-keyword'. Makes property keys as :LAST_REPEAT:
display correctly.
This patch adds a modification hook to remove inline-image overlays if
the underlying text is modified. This prevents blind editing of text
behind images.
* lisp/org-exp-blocks.el (org-export-blocks-postblock-hook): adding
documentation to and turning into a defcustom
(org-export-blocks-preprocess): actually running the
`org-export-blocks-postblock-hook' hook after preprocessing
Environments coming from latex backend specific instructions (#+LaTeX)
are already protected and won't be treated as normal environments.
* lisp/org-latex.el (org-export-latex-preprocess): Environments coming
from latex backend specific instructions (#+LaTeX) are already
protected and won't be treated as normal environments.
use a property named "task_id" instead as we do not search for task
ids across files. For resources use a property named "resource_id" or
only as a fall back the ID property.
Also issue a warning if a dependency cannot be resolved.
- Attributes are now insetred generically based on an item (resource
or task) a list of attrbutes
- project end is now solely calculated and no longer inserted in the
node
* lisp/org.el (org-raise-scripts): Do not act in links.
Matt Lundin writes:
> Git commit 70d24c5d03 causes underscores
> in hyperlinks to display parts of link and description as subscripts.
> E.g., this link...
>
> [[http://www.samplepage.com/an_underscore][Some description words]]
>
> ...displays the word "Some" in the description as a subscript. With M-x
> visible-mode, the substring "underscore][Some" is displayed as a
> subscript.
* lisp/org-exp.el (org-export-remove-special-table-lines): Only fix table
lines that are not protected text.
Giovanni Moretti writes:
> I'm working up a presentation on orgmode for a local club and needed
> to prefix it with a brief emacs overview, and so included this:
>
> #+BEGIN_EXAMPLE
> ctrl-P (previous line)
> |
> |
> Ctrl-A <<< Ctrl-B <---- o ----> Ctrl-F >>> Ctrl-E
> Col 1 back char ! fwd char EOL
> !
> ctrl-N (next line)
> #+END_EXAMPLE
>
> : ctrl-P (previous line)
> : |
> : |
> : Ctrl-A <<< Ctrl-B <---- o ----> Ctrl-F >>> Ctrl-E
> : Col 1 back char | fwd char EOL
> : |
> : ctrl-N (next line)
>
> I'm using Orgmode v6.36c and when exporting to HTML (and LaTex
> Beamer), the two lines containing the single vertical bar immediately
> below the "ctrl-P" line in the #+EXAMPLE block vanish, whereas using
> the alternate colon at the beginning of the line notation, the
> rendering is as expected.
>
> Interestingly, enabling the +n option (#+BEGIN_EXAMPLE +n) causes the
> missing lines (lines 2 & 3) to reappear.
* lisp/org.el (org-edit-special): Make sure source code editing goes
before table formula editing.
* lisp/org-table.el (org-table-fedit-map): "C-c '" will now also exit
the formula editor.
Carsten Dominik <dominik@uva.nl> writes:
> Hi Dan,
>
> after a long time, I tried to edit a fixed width region today.
> So I entered
>
> : a
> : b
> : c
>
> and pressed "C-c '" in there. The edit buffer came up in
> read-only mode, which should not be so.
>
> Also, when I do "C-c '" in an empty line, it used to be the case
> that I get an empty artist buffer which I can then edit. Also this
> buffer comes up as read-only.
>
> I suspect that this has to do with the changes you made for read-only
> view buffers. Before I dive into this issue myself, maybe it will be
> much
> easier if you do this?
Hi Carsten,
You're right that it dates from then. Here's the fix I suggest. I've
tested that this results in writable fixed-width edit buffers, writable
src edit buffers, and non-writable babel preview buffers.
Dan
--8<---------------cut here---------------start------------->8---
commit ed4eb9d150
Author: Dan Davison <davison@stats.ox.ac.uk>
Date: Sat Jun 5 12:35:19 2010 +0100
* lisp/org-src.el: Prevent fixed-width region edit buffers
being created as read-only.
Modified lisp/org-src.el
* contrib/lisp/org-special-blocks.el (org-special-blocks-make-special-cookies):
Emacs 22 doesn't have string-match-p
* lisp/org-freemind.el (org-freemind-write-mm-buffer):
(org-freemind-get-node-style):
Emacs 22 doesn't have string-match-p
* lisp/org-html.el (org-html-make-link):
Use new org-string-match-p for compatibility
* lisp/org.el (org-read-date-analyze): Fix regular expression for
matching american dates
Daniel E. Doherty writes:
> In playing around with the date prompt (C-.), I ran across the following
> puzzling behavior from rather simple inputs.
>
> I entered the following on June 1, 2010. Here is a date entered as
> "3/15": <2011-03-15 Tue>. It interpreted it as the upcoming March 15 as
> expected.
>
> But here is a date entered as "5/21": <2021-06-05 Sat>. Note how it
> interpreted the "21" as the year 2021, not at all what I expected from
> the documentation or the analogous "3/15" example.
>
> Maybe there is some underlying logic here that I'm not getting. Perhaps
> it has to do with how 2-digit years are interpreted?
>
> What's going on here? I am using org-version 6.36trans on emacs 23.1.
What was going on here is that the regular expression for matching
american-style dates was wrong. It was looking for month numbers in
the second field and day numbers in the first field - wrong, of
course.
* lisp/org-macs.el (org-rm-props): Add org-emphasis to the properties
that must be removed.
* lisp/org.el (org-do-emphasis-faces): Add org-emphasis property to
items that have emphasis done wit font-lock.
(org-fontify-entities): Do not do anything in commented lines.
(org-unfontify-region): Decompose the region as well, because we do
composition during font-lock.
(org-raise-scripts): Do nothing inside an emphasis string.
Reported by Eric Fraga in http://article.gmane.org/gmane.emacs.orgmode/25940
* lisp/org-compat.el (org-string-match-p):
(org-looking-at-p): New functions.
* lisp/org-table.el (org-table-align): Handle raised text with
invisible characters.
* lisp/org.el (org-script-display): Add raise properties for tables.
(org-raise-scripts): Handle raising differently inside tables.
Pretty display of subscripts and superscripts no longer messes up
table alignment. This is achieved by two things:
1. Inside tables, the raised characters are not made smaller, they
remains at the same size. Instead they are raise/lowered more, by
a full half character height to still be clearly readable as
subscript or superscript.
2. The invisible characters are taken into account when computing the
field width.
* lisp/org.el (org-ctrl-k-protect-subtree): New option.
(org-kill-line): Protect hidden subtrees if the user wants it.
* doc/org.texi (Headlines): Mention the special behavior of C-k
in headlines.
Scott Otterson writes:
> For what must be the dozenth time, I've just accidentally deleted a
> large tree by typing C-k while in a headline.
>
> This is really easy to do because emacs users have "C-k deletes to the
> end of the line" worn deeply into their neural pathways -- it's so
> automatic for me that the keystroke is close to subconscious. A
> mistaken C-k is especially hard to detect because org-mode displays
> the result exactly like what your subconscious expects, that is, a
> collapsed headline is deleted to the end -- and the tree underneath is
> wiped out with no noticeable warning.
>
> Feature request: add an option preventing tree deletion with C-k
> without user confirmation. Actually, I'd like an option to prevent it
> period.
>
> If this option is already in there, then you're encouraged to tell me
> to RTFM. But then also please tell me where it is, because I can't
> find it.
Carsten replies
> This is now possible due to the variable
> `org-ctrl-k-protect-subtree'. But I predict that you are going to set
> it to nil again soon :D
* doc/org.texi (Subscripts and superscripts): Document that `C-c C-x \'
will also format sub and superscripts.
* doc/orgcard.tex: Document that `C-c C-x \'
will also format sub and superscripts.
* lisp/org.el (org-use-sub-superscripts):
(org-pretty-entities-include-sub-superscripts): Move here from
org-exp.el.
(org-set-regexps-and-options): Parse subscript option and set
`org-use-sub-superscripts' as a local variable.
(org-match-sexp-depth):
(org-create-multibrace-regexp):
(org-match-substring-regexp):
(org-match-substring-with-braces-regexp): Moved here from org-exp.el
(org-set-font-lock-defaults): Call `org-raise-scripts'.
(org-remove-font-lock-display-properties): New function.
(org-unfontify-region): Call
`org-remove-font-lock-display-properties'.
(org-script-display): New constant.
(org-raise-scripts): New function.
When turning on entity display with `C-c C-x \', sub- and superscripts
will also be displayed in a smaller font, and raised/lowered.
* lisp/org-latex.el (org-export-latex-fontify): Avoid fontifying
several stars in a row.
* lisp/org.el (org-emphasis-alist): Mention
`org-export-docbook-emphasis-alist' in the docstring.
Called with a numeric prefix argument, `org-timer-set-timer' uses
this numeric value as the duration of the timer.
Called with a `C-u' prefix argument, use `org-timer-default-timer'
without prompting the user for a duration.
With two `C-u' prefix arguments, use `org-timer-default-timer'
without prompting the user for a duration and automatically
replace any running timer."
* lisp/org.el (org-store-link): Don't call org-store-link
interactively when called through remember from the agenda
Samuel Wales writes:
> For months, I found ID properties where they didn't belong.
> Finally I found that they are added when I do M-x
> org-remember in an agenda buffer, to the headline under
> point. Feels like a bug. [...]
The new function `org-agenda-file-p' checks if a given file is an org
agenda file. Such a function is very useful in hooks, for example if
you want to export agenda files automatically when saving:
(defun th-org-mode-init ()
;; Update appointments and export to iCalendar when saving.
(when (org-agenda-file-p)
(add-hook 'after-save-hook 'th-org-agenda-to-appt t t)
(add-hook 'after-save-hook 'org-export-icalendar-this-file t t)))
(add-hook 'org-agenda-mode-hook 'th-org-agenda-mode-init)
