Karl Stump writes:
> When exporting a table with a horizontal line the column count is wrong.
>
> Output from pdflatex run:
>
> ! Extra alignment tab has been changed to \cr.
> <template> \endtemplate
>
> l.32 ....\multicolumn{4}{r}{Continued on next page}
> \
> ?
>
> Here's the table in the tex file:
>
> \begin{longtable}{||lll||}
> \caption{This is a long table with lines around and between cells}\\
> Heading1 & Heading2 & Heading3 \\
> \hline
> \endhead
> \hline\multicolumn{4}{r}{Continued on next page}\
> \endfoot
> \endlastfoot
> \hline
> alpha & beta & gamma \\
> & & \\
> \end{longtable}
>
> Here's the org file:
>
> ** table export test
>
> #+CAPTION: This is a long table with lines around and between cells
> #+LATEX_HEADER: \usepackage[landscape]{geometry}
> #+LATEX_HEADER: \geometry{left=0.12in,right=0.12in,top=0.25in,bottom=0.25in}
> #+ATTR_LaTeX: longtable align=||lll||
>
> | / | <30> | <10> | <10> |
> | | Heading1 | Heading2 | Heading3 |
> |---+----------+----------+----------|
> | | alpha | beta | gamma |
> | | | | |
Nick Dokos replies:
> I believe it's because of the dummy "calculation-mark" column,
> which is not exported. However, the variable org-table-last-alignment
> (a list, whose length becomes the value of the \multicolumn argument)
> ends up having the value (nil nil nil nil), i.e. it counts the dummy
> column as well. What the proper place to adjust the value is, I don't
> know, but it should be easy for Carsten to fix it. For the time being,
> you can either get rid of the dummy row and column (e.g. if you don't
> need the widths) or fix it by hand in the LaTeX file.
Indeed, and this commit pops `org-table-last-alignment' if the first
column has been removed by `org-table-clean-before-export'. The same
problem must have caused a one-off error when setting the alignment in
LaTeX tables, bu it seems nobody has noticed this so far. Anyway,
also this is fixed now.
Bernt Hansen writes:
> I ran into this a few weeks ago and it's been bugging me.
>
> I reorganized a project which had a deadline on the main task and moved
> it down to multiple subtasks in the project.
>
> ,----
> | * TODO Project task
> | DEADLINE: <2009-08-28 Fri>
> | ** TODO Step 1
> | ** TODO Step 2
> | ...
> | ** TODO Step n
> `----
>
> I decided the DEADLINE really doesn't belong at the top -- since the
> deadline was for step 2 (and a few other tasks)... so I moved it the
> hard way. Instead of cutting it out and pasting it back in the right
> tree I just used C-c C-d and entered the same date on step 2 (because I
> was moving the date a bit from the original date).
>
> ,----
> | * TODO Project task
> | DEADLINE: <2009-08-28 Fri>
> | ** TODO Step 1
> | ** TODO Step 2
> | DEADLINE: <2009-08-28 Fri>
> | ...
> | ** TODO Step n
> `----
>
> Now to remove the deadline from the Project task I just did C-u C-c C-d
> on the Project task but this removed all the deadlines in the subtree
> and my deadline in Step 2 (and others) is now gone.
>
> AFAICT SCHEDULED: works the same way. This doesn't feel natural to me
> but I know it is documented this way.
>
> Does the way it works now really make sense or would just removing the
> deadline from the task you are working on be better.
>
> C-c C-d sets a deadline just for this task, so it felt natural to me
> that C-u C-c C-d would remove the deadline just for this task -- but
> that's what I get for not reading the manual (or forgetting since I read
> it ;)
The width and alignment in table columns can be set with a cookie like
"<10>" or "<r>" or "<r10>". In order to keep Org from exporting such
lines, the first column of a line can contain only "/". However, for
convenience, this commit implements a special case: If the entire row
contains only sch markers, the line will automatically be discarded
during export.
Bernt Hansen writes:
> I think I have something that is reproducible.
>
> ,----[ /tmp/x.org ]
> |
> | * Refile Targets
> | ** TODO One
> | ** TODO Two
> | ** TODO Three
> | ** TODO Four
> | ** TODO Five
> | ** TODO Six
> | *** TODO Six.one
> | *** TODO Six.two
> | **** TODO Clock me
> | ** TODO Seven
> | ** TODO Eight
> | ** TODO Nine
> | ** TODO Ten
> | * Refile Tasks
> | ** TODO Refile Me
> `----
>
> ,----[ /tmp/minimal.emacs ]
> | (add-to-list 'load-path (expand-file-name "~/git/org-mode/lisp"))
> | (add-to-list 'auto-mode-alist '("\\.\\(org\\|org_archive\\|txt\\)$" . org-mode))
> | (require 'org-install)
> |
> | (global-set-key "\C-cl" 'org-store-link)
> | (global-set-key "\C-ca" 'org-agenda)
> | (global-set-key "\C-cb" 'org-iswitchb)
> |
> | (setq org-log-done (quote time))
> | (setq org-log-into-drawer t)
> | (setq org-agenda-files '("/tmp/x.org"))
> | (setq user-init-file "/tmp/custom.el")
> |
> | (setq org-refile-allow-creating-parent-nodes nil)
> | (setq org-refile-targets (quote ((nil :maxlevel . 2) (org-agenda-files :maxlevel . 2))))
> | (setq org-refile-use-outline-path nil)
> | (setq org-todo-keywords (quote ((sequence "TODO(t!)" "STARTED(s!)" "|" "DONE(d!/!)") (sequence "WAITING(w@/!)" "SOMEDAY(S!)" "OPEN(O@)" "|" "CANCELLED(c@/!)") (sequence "QUOTE(q!)" "QUOTED(Q!)" "|" "APPROVED(A@)" "EXPIRED(E@)" "REJECTED(R@)"))))
> `----
>
> Steps to reproduce:
>
> 1. Save the files /tmp/x.org and /tmp/minimal.emacs
> 2. emacs -q -l /tmp/minimal.emacs /tmp/x.org
> 3. Go to CONTENTS view with S-TAB twice
> 4. Put point on **** TODO Clock Me
> 5. Clock in the task with C-c C-x C-i
>
> This adds a logbook drawer with the clock
>
> 6. Fold to OVERVIEW view with S-TAB
>
> So it looks like this
>
> ,----[ x.org folder ]
> |
> | * Refile Targets...
> | * Refile Tasks...
> `----
>
> 7. M-x org-clock-goto
>
> This reveals the buffer like so:
>
> ,----
> |
> | * Refile Targets...
> | **** TODO Clock me
> | :LOGBOOK:...
> | ...
> | * Refile Tasks...
> `----
>
> I think this is the critical step.
>
> 8. Put point on Refile Tasks
> 9. Show task to refile with TAB
> 10. Put point on ** TODO Refile Me
> 11. Refile to Ten with C-c C-w Ten RET
> 12. Put point on Refile Me
> 13. Reveal with C-c C-r
>
> Shows that we are under TODO Ten. So far so good
>
> ,----
> |
> | * Refile Targets...
> | **** TODO Clock me
> | :LOGBOOK:...
> | ...
> | ** TODO Ten
> | *** TODO Refile Me
> | * Refile Tasks
> `----
>
> 14. Now repeat steps 10-13 but refile to 'Two' instead of 'Ten'
>
> This goes to the wrong place. This files under Nine for me
>
> ,----
> |
> | * Refile Targets...
> | **** TODO Clock me
> | :LOGBOOK:...
> | ...
> | ** TODO Nine
> | *** TODO Refile Me
> | ** TODO Ten
> | * Refile Tasks
> `----
>
> 15. Repeat steps 10-13 with refiling to 'Two' each time
>
> This moves Refile Me up one task at a time until it gets to Two
> ie. it refiles to Eight, then Seven, then Six, then Five, then
> Four then Three, then Two.
>
> If you show contents view with S-TAB and then refile it goes to the
> right place immediately. So this definitely has something to do with
> the folded view of the org file.
>
Henry Atting writes:
> If org agenda is displayed in an other frame then windows aren*t
> restored when quitting, I have to kill the frame manually. I
> really would like it to behave like e.g. gnus-other-frame which
> automatically kills his frame on quitting.
The new keys are b and f. This used to be on the cursor keys, but
they do now again do cursor motion.
This is a significant change in the UI, I hope this will not cause too
many problems.
Fix bulk refiling in the agenda due to commit
9ec5529 (Fix jumping to last refile location in agenda, 2009-08-20)
This restores the original behaviour.
Longmin Wang writes:
> Hi,
>
> I am using org-mode integrated in emacs 23.1.1. When I export
> the org file to html file, the enumerations will be interrupted
> by some displayed math formulae. For example, the codes
>
> 1. The first.
>
> 2. A displayed formula: \[ \int_0^{+\infty} \frac{c}{1+x^2}dx=1. \]
>
> 3. The third.
>
> will generate
>
> 1. The first.
> 2. A displayed formula:
> <the formula>
> 1. The third.
>
> Is it a bug? Or I made some mistakes in the source file.
`org-cycle-separator-lines' can now get a negative value, to indicate
that, if the number of empty lines before a visible entry is greater
than the specified number, then *all* empty lines should be shown.
Use `gnus-summary-article-header' function when in gnus-summary-mode.
This way the article doesn't get displayed unnecessarily. We don't use
this function in the gnus-article-mode because it is not reliable.
Thanks to Leo for this suggestion.
Eric Schulte writes:
> Attached is a small patch for a small issue.
>
> Sometimes a language uses a major mode which can't be guessed
> from it's name. This patch introduces the `org-src-lang-modes'
> variable which can be used to map language names to major modes
> when this is the case. This is used when editing a source-code
> block, or when exporting fontified source-code with htmlize.
>
> So far the only instance of this that I know of is ocaml and
> tuareg-mode, so that's the only thing that `org-src-lang-modes'
> is pre-populated with. Maybe there are other instances as well?
Nick Dokos writes:
> I define a LaTeX macro at the top of my document, like so:
>
> ,----
> | ...
> | #+LATEX_HEADER: \newcommand{\rowstyle}[1]{\gdef\currentrowstyle{#1}%
> | #+LATEX_HEADER: #1\ignorespaces
> | #+LATEX_HEADER: }
> | ...
> `----
>
> and export - I get the following inserted:
>
> ,----
> | ...
> | \begin{document}
> |
> |
> |
> |
> |
> | \$\^{}{1}\$ FOOTNOTE DEFINITION NOT FOUND: 1
> | ...
> `----
>
> Obviously, the macro argument spec is mistaken for a footnote.
Adds the output of 'git describe' to the org-version string if we are running
from a git repository. This identifies exactly what commit is checked out in
the org-mode git repository when reporting the org-mode version number.
org-version returns something like:
Org-mode version 6.29trans (release_6.29c.42.g5996)
which shows 6.29trans (somewhere after the last release tag) which
is 42 commits after release_6.29c at git commit 5996.
The git describe information is not included if org mode is not
running from a git repository.
This bug was caused by commit
8c177dc832, and reported by Matt
Lundin. The problem was that this commit tried to remove the text
propertes of the MATCH part of an agenda command. However, in block
commands, the MATCH part is not a string.
An entry `#+TODO:' without content make `M-x org-mode' fail.
While it may cause problems to have no TODO keywords defined, this
should not make entering the mode fail.
It is possible that the regular expressions for LaTeX snippets match
at nested locations. For example, Nick Dokos submitted this:
,----
| #+LaTeX_HEADER: \usepackage{amsmath}
|
| * foo
|
| \[
| \begin{matrix}
| 1&d\\
| d&d\\
| \end{matrix}
| \]
|
`----
where the snippet regexps match at \[ ... \] and also at
\\begin{matrix}.
This would lead to two nested overlays being placed. With this
commit, only the outer one will remain.
A `save-excursion' around a call to org-table-align make point end up
*before* the table. The reason is that a table align replaces the
entire table, including the newline before it. When the table is
removed in order to be replaced, the marker created by
`save-excursion' slips. `org-table-align' has it's own, built-in
`save-excursion' by remembering the line and column where the cursor
was before the align.
However, if you are using arguments, it is required that the opening
parenthesis is attached to the macro name, and that the closing
parenthesis is attached to the three closing braces.
With the following org file:
------
Foo
In which foos are described.
#+OPTIONS: num:nil author:nil creator:nil timestamp:nil d:nil toc:nil skip:t
#+TITLE:
* The construction of a foo
** Armaments
------
I found exporting to ASCII gave five leading blank lines. The
following patch reduces that to one. (I'd love some help in tracking
down that final one.)