* lisp/org-agenda.el (org-agenda-clock-consistency-checks): New option.
(org-agenda-list): Handle display change to clock check.
(org-agenda-get-progress): Show only clock entries if we are doing the
consistency check.
(org-agenda-show-clocking-issues): New function.
(org-agenda-check-clock-gap): New function.
(org-agenda-view-mode-dispatch): Offer consistency check.
(org-agenda-log-mode): Handle switch to clock only display.
(org-agenda-set-mode-name): Show lighter for Clockcheck.
* lisp/org.el (org-hh:mm-string-to-minutes): Accept an integer argument
and return it unchanged.
* doc/org.texi (Agenda commands): Document clock consistency checks.
* doc/orgcard.tex: Document key for clock consistency check.
* org-clock.el (org-clock-report): change the scope of the
inserted clock report depending on whether the point is within
a subtree (:scope subtree) or not (:scope file).
* org-clock.el (org-clock-clocktable-language-setup): Add a
string.
(org-clocktable-write-default): Use the new localized string
in `org-clock-clocktable-language-setup'.
* lisp/org-clock.el (org-clock-in): Allow clocking in new tasks inserted
before the current clocking task
org-clock-in now checks that the name of the task you are clocking in
also matches org-clock-current-task. This allows us to insert a new
task in front of the current clocking task (with M-S-RET on the
heading of the current clocking task) and then clock in the new task.
Previously this just stated that clocking continues in the old task
since the marker point now matches the new task.
A side-effect of this change is that changing the current clocking
task headline and clocking in again will now close the current clock
and open a new entry as well as update the name of the current
clocking task in the modeline.
* lisp/org-clock.el (org-clock-in): Set default clocking task when already clocking the task
The default clocking task can now be set to the current clocking task.
Previously this just threw an error stating the clock continues in the
current clocking task. The double prefix now forces setting the
default clocking task instead of forcing the user to clock out and
back in again just to set the default clocking task to the current
clocking task.
Luke Crook wrote:
> Is it possible to specify estimated effort in something other
> than hours (0.5, or 0:30)?
> For example 1w, 1m, 2d etc?
Here's a cleaned up patch that allows user-specified modifiers
for effort strings. The new variable `org-effort-durations'
lists modifiers, and their mapping to minutes (words, as well as
single-letter modifiers, are supported). The default value is:
(("h" . 60)
("d" . 480) ; 8 hours
("w" . 2400) ; five days
("m" . 9600) ; 4 weeks
("y" . 96000)) ; 40 weeks
But you can change this.
Old effort strings (HH:MM) are still interpreted correctly. See
the docstrings of `org-effort-durations' and
`org-duration-string-to-minutes' for more details.
>From a0e24b14755eb4087d9c47bb4eea11eb9151efcf Mon Sep 17 00:00:00 2001
From: Lawrence Mitchell <wence@gmx.li>
Date: Fri, 18 Feb 2011 11:01:46 +0000
Subject: [PATCH] Allow human-readable effort durations
To: emacs-orgmode@gnu.org
* lisp/org.el (org-effort-durations): New variable.
* lisp/org.el (org-duration-string-to-minutes): New function.
* lisp/org-agenda.el (org-agenda-filter-effort-form)
(org-format-agenda-item): Use it.
* lisp/org-clock.el (org-clock-notify-once-if-expired)
(org-clock-modify-effort-estimate, org-clock-get-clock-string): Use it.
Specifying large effort durations in hours and minutes is difficult.
Is 130:25 more than two weeks effort? More than three? This patch
allows specification of an effort duration as a friendly string. For
example 2w 5d is two weeks and five days of effort. Existing H:MM
entries will still be recognised correctly.
* lisp/org-clock.el (org-clock-find-position): if a list was adjacent
to some clocks and a drawer was going to be created, only the first
element of the list would make it into the drawer.
* org-clock.el (org-clocktable-write-default): Bugfix: falls
back on `org-export-default-language' when no :lang parameter
is set.
Also fix various typo in comments.
* org-clock.el (org-clock-clocktable-language-setup): New
custom variable.
(org-clocktable-defaults): Set the default language.
(org-clocktable-write-default): Use the new variable.
I just found a left over in org-list.el. :)
Updated patch attached.
>From bf6c65a42e04d4753c58795442a479685bb5f318 Mon Sep 17 00:00:00 2001
From: Julien Danjou <julien@danjou.info>
Date: Wed, 26 Jan 2011 11:14:11 +0100
Subject: [PATCH] org: remove org-invisible-p
* org.el: Remove org-invisible-p: outline-invisible-p is
available in Emacs 22 and in recent XEmacs 21. Replace in
various files.
Signed-off-by: Julien Danjou <julien@danjou.info>
* lisp/org-clock.el (org-clock-before-select-task-hook): New hook.
(org-clock-select-task): Run new hook.
Hi Org-moders,
I am often frustrated because I clock a lot of things and some of them
are repeated (i.e, coffee, read mails, etc.). So when I want to clock
time I spend drinking coffee, the best I found was to search for a
headline matching "Coffee". Or to tag frequent clocks and do some
agenda research on this tag. Too long. :-)
So here is a solution for this need : to add a shortcut property to
entries I would like to "bookmark" and insert matching entries in the
org-clock-select-task menu. This can be done with :
* TODO Pause and drink coffee
:PROPERTIES:
:SHORTCUT: p
:END:
then C-u C-c C-x C-i p. And voil, "Pause and drink coffee" is clocked!
Here is a patch that adds a hook into org-clock-select-task and a module
that adds the shortcut feature. I tried to be the least intrusive
possible, if this proves to be useful, the hook trick might not be
needed.
Benj
TINYCHANGE
* lisp/org.el (org-get-category): New optional argument FORCE-REFRESH.
Automatically refresh if the property is not there.
(org-entry-properties): Remove refresh - this is now done in
org-get-category.
* lisp/org-clock.el (org-clock-insert-selection-line): Let `org-get-category'
do the property refresh.
* lisp/org-archive.el (org-archive-subtree): Force a refresh of
category properties.
Based on a patch by Julien Danjou.
* org-icalendar.el (org-print-icalendar-entries): Do not manually
refresh categories.
* org-clock.el (org-clock-insert-selection-line): Do not manually
refresh categories.
* org.el (org-get-category): Refresh categories if no category found.
(org-entry-properties): Do not manually refresh categories.
(org-prepare-agenda-buffers): Do not manually refresh categories.
It seems a very bad thing to call manually for a category refresh. It
seems better to try to refresh if we do not have a category.
Signed-off-by: Julien Danjou <julien@danjou.info>
* lisp/org-clock.el (org-day-of-week): New function.
(org-quarter-to-date): New function.
(org-clock-special-range): Implement quarters.
Patch by Erwin Vrolijk
* lisp/org-clock.el (org-get-clocktable)
previous patch incorrectly required whitespace in front of #+BEGIN: and #+END:
TINYCHANGE - This patch is in the public domain.
* lisp/org-clock.el (org-get-clocktable):
(org-in-clocktable-p):
(org-clocktable-shift):
(org-clocktable-steps): Fix regexp to allow for indented clock tables
#+BEGIN: and #+END: were expected only at the first column in some
places.
#BEGIN: and #END: were erroneously recognized inside normal lines in
other instances.
always allow whitespace after #BEGIN: and #END:, not just a single space
TINYCHANGE - This patch is in the public domain.
* org-clock.el (org-dblock-write:clocktable): fix double
reference to `link' in let construct.
(org-clock-clocktable-formatter): Fix typo in docstring.
(org-clocktable-write-default): Fix typo in docstring.
* lisp/org-clock.el (org-clocktable-write-default): Better handling of
narrowing.
Liang Wang writes:
> After I upgrade orgmode to latest version, clock report shows link
> text literally.
>
> For example,
>
> [[file:/home/liang/gtd/todo.org::Task...
>
> Unfortunately, in this way, I can not see what this task actually is.
> I have to temporarily disable link in clock report.
* lisp/org.el (org-shorten-string): New function.
* lisp/org-exp.el (org-export-convert-protected-spaces): New function.
(org-export-preprocess-string): Call
`org-export-convert-protected-spaces' to handle new hard spaces.
* lisp/org-clock.el (org-clocktable): New customization group.
(org-clocktable-defaults): New option.
(org-clock-clocktable-formatter): New option.
(org-clock-clocktable-default-properties): New option.
(org-dblock-write:clocktable): Rewrite to split out functionality
into separate functions.
(org-clocktable-write-default):
(org-clocktable-indent-string):
(org-clock-get-table-data): New functions.
* lisp/org-agenda.el (org-agenda-list):
(org-agenda-redo):
(org-agenda-clockreport-mode):
(org-agenda-set-mode-name): Rewrite to implement filtered clock tables.
* doc/org.texi (Clocking commands):
(The clock table): New sections.
(Agenda commands): Document filtered clock reports.
* lisp/org-clock.el (org-dblock-write:clocktable): Fix bug
when computing clock tables.
Ouch, bad bug. Resetting the clock file time was always
happening in the same file, not in the different files
visited by the summer.
* lisp/org-clock.el (org-dblock-write:clocktable): Pass file minutes
up to caller even if no table is generated.
Rainer Stengele writes:
> 1. Without maxlevbel I get I get
>
> #+BEGIN: clocktable :scope ("file1.org" "file2") :timestamp t :tstart "<2010-05-01 Sa 00:00>" :tend "<2010-07-31 Sa 23:55>"
> Clock summary at [2010-07-22 Do 09:07]
>
> | File | L | Timestamp | Headline | Time | | |
> |-------------------+---+---------------------+----------------+----------+--------+--------|
> | | | Timestamp | *Total time* | *327:51* | | |
> ...
>
>
>
> with :maxlevel 0 I get
>
>
> #+BEGIN: clocktable :maxlevel 0 :scope ("file1.org" "file2") :timestamp t :tstart "<2010-05-01 Sa 00:00>" :tend "<2010-07-31 Sa 23:55>"
> Clock summary at [2010-07-22 Do 09:11]
>
> | File | L | Timestamp | Headline | Time |
> |------+---+-----------+--------------+----------|
> | | | Timestamp | *Total time* | *232:17* |
> |------+---+-----------+--------------+----------|
> #+END:
>
>
> I would like to get the same results!
> Is ":maxlevel 0" intended to not include the sublevel clocks?
This is a fixup patch to commit
17c71a40c6. The org-clock-clocking-in
variable needs to be set when we are clocking out - in case the clock
out hook clocks-in again. This fixes a bug that creates dangling
clock entries.
This reverts commit 4a4fbf1b8c.
Clocking in the currently clocking task was leaving open clock entries
which is incorrect. Updating the modeline is less important than
keeping correct clocking data.
notifications.el is a new package from Julien Danjou, available
in Emacs 24.1. From etc/NEWS:
,----
| ** notifications.el provides an implementation of the Desktop
| Notifications API. It requires D-Bus for communication.
`----
I just tried adding :step day to
org-agenda-clockreport-parameter-plist, but then hitting R in the
agenda caused a crash, since org-clocktable-steps expects ts and te to
be strings, though in fact they are Gregorian day numbers.
This patch fixes the problem for me. It's quite ugly, so I don't
expect it to be committed in its current form :) but I hope it serves
as inspiration for someone to figure out the right way to solve this.
* lisp/org-clock.el (org-clocktable-steps): Allow ts and te to be
day numbers.
TINYCHANGE
* org-agenda.el (org-agenda-clock-goto): Use `\C-c\C-x\C-j' for
`org-clock-goto' and `J' for `org-agenda-clock-goto'. If the heading
currently clocked in is not listed in the agenda, display this entry
in another buffer. If there is no running clock, display a help
message.
* org-clock.el (org-clock-set-current): append the filename after the
heading.
This patch makes some straightforward corrections to a number of
docstrings. Each change is normally to:
- correct a typo, or
- fix up hyperlinks to function or variable names, or
- ensure slightly better conformance with the documentation guidelines
and tips given in the Elisp manual
No attempt is made to provide missing docstrings or document arguments.
Cheers,
Phil
