* lisp/ob-sql.el(org-babel-execute:sql): Add support for MonetDB to
SQL code blocks.
Hi,
the attached patch adds support for evaluating SQL blocks on MonetDB.
The MonetDB client normally requires the password to be inputted on the
console. To get around this, you have to use a dotfile ~/.monetdb with
authentification data. Note that this file is ignored if you specify a
user on the cmdline. See
http://www.monetdb.org/Documentation/mclient-man-page for details.
A usage example follows.
Setup MonetDB test database and authentification data
#+BEGIN_SRC sh :results output verbatim
MONETDB_DIR=$HOME/unix/var/monetdb/demodb
monetdbd create $MONETDB_DIR
monetdbd start $MONETDB_DIR
monetdb create demodb
monetdb release demodb
cat > ~/.monetdb <<EOF
user=monetdb
password=monetdb
EOF
#+END_SRC
#+RESULTS:
: created database in maintenance mode: demodb
: taken database out of maintenance mode: demodb
Data is returned without column names (the default return format
cannot be parsed by Babel).
#+BEGIN_SRC sql :engine monetdb :cmdline demodb
CREATE TABLE foo ( bar INTEGER );
SELECT 'Table count', count(*) FROM foo;
#+END_SRC
#+RESULTS:
| Table count | 0 |
The parameter "-i" is required on the command line in order to use
special client commands. Also note that a newline is required at the
end if the last line contains a special client command.
#+BEGIN_SRC sql :engine monetdb :cmdline demodb -i :results output
verbatim
\d
\?
#+END_SRC
#+RESULTS:
#+begin_example
TABLE sys.foo
\? - show this message
\<file - read input from file
\>file - save response in file, or stdout if no file is given
\|cmd - pipe result to process, or stop when no command is given
\h - show the readline history
\D table- dumps the table, or the complete database if none given.
\d[Stvsfn]+ [obj] - list database objects, or describe if obj given
\A - enable auto commit
\a - disable auto commit
\e - echo the query in sql formatting mode
\f - format using a built-in renderer {csv,tab,raw,sql,xml}
\w# - set maximal page width (-1=unlimited, 0=terminal width,
>0=limit to num)
\r# - set maximum rows per page (-1=raw)
\L file - save client/server interaction
\X - trace mclient code
\q - terminate session
#+end_example
Have fun!
> attached is a patch that enhances org-babel-goto-named-src-block (bound
> to C-c C-v g by default). Included are two enhancements:
>
> 1. the point is pushed to the org-mark-ring, such that returning with
> C-c & becomes possible
> 2. the target src block is guessed from
> a) noweb-reference
> b) #+call:
> c) #+results:
> d) symbol-at-point
> if one of these is found (in that order)
* lisp/ob.el (org-babel-goto-named-src-block): Pushing the point to
the org-mark-ring and guessing at the code block name to jump to.
* EXPERIMENTAL/org-e-latex.el (org-e-latex-footnote-reference): Allow
nested footnotes.
* contrib/lisp/org-element.el (org-element-string-restrictions): Allow
footnote references within a footnote reference.
* testing/contrib/lisp/test-org-export.el: Add a test for nested
footnotes.
* contrib/lisp/org-export.el (org-export-collect-tree-properties):
Do not overwrite any user's ignore list.
* testing/contrib/lisp/test-org-export.el: Add test.
A good way to populate `:ignore-list' is through the use of
`org-export-filter-parse-tree-functions', with the help of
`org-element-map' and `org-export-ignore-element'. As an example, the
following code will skip every headline containing the word "note"
in its title during a LaTeX export:
(defun user-skip-note-headlines (data backend info)
;; For now LaTeX back-end is called `e-latex'.
(when (eq backend 'test)
;; Traverse the parse tree, adding to ignore list any headline
;; matching criteria.
(org-element-map
data 'headline
(lambda (headline)
(when (string-match "\\<note\\>"
(org-element-property :raw-value headline))
(org-export-ignore-element headline info)))
info))
;; Return original DATA.
data)
Then install it in parse-tree filters:
(add-to-list 'user-skip-note-headlines org-export-filter-parse-tree-functions)
Back-end delevopers will install it via `org-BACKEND-filters-alist'
where BACKEND stands for the name of the back-end considered. Se
`org-export-filters-alist' for more information.
* contrib/lisp/org-element.el (org-element-map): Remove use of an
alternate communication channel. Function is now called with only
one argument.
* contrib/lisp/org-export.el (org-export-collect-tree-properties):
(org-export-collect-headline-numbering, org-export--selected-trees,
org-export-collect-footnote-definitions,
org-export-footnote-first-reference-p,
org-export-get-footnote-number, org-export-resolve-fuzzy-link,
org-export-resolve-id-link, org-export-resolve-ref-link,
org-export-resolve-coderef, org-export-get-ordinal,
org-export-get-loc, org-export-collect-headlines): Apply changes.
* EXPERIMENTAL/org-e-ascii.el (org-e-ascii--unique-links): Apply
changes.
* EXPERIMENTAL/org-e-publish.el (org-e-publish-collect-index): Apply
changes.
* org-agenda.el (org-agenda-tree-to-indirect-buffer): Fix handling of
indirect buffer and window.
Check if the window of last indirect buffer is still live and properly
handle the case of `org-last-indirect-buffer' being nil.
Changes suggested by Dave Abrahams in <m2boow1q9e.fsf@boostpro.com>.
* contrib/lisp/org-export.el (org-export-expand-include-keyword): Use
another optional argument to specify the current working directory.
(org-export-as): Apply changes.
* testing/contrib/lisp/test-org-export.el: Add tests.
* testing/examples/include.org: New test file.
* testing/examples/include2.org: New test file.
* contrib/lisp/org-export.el (org-export-snippet-backend): New
function.
(org-export--skip-p): Remove automatic skip of export snippets.
* EXPERIMENTAL/org-e-ascii.el (org-e-ascii-export-snippet): Use new
function.
* EXPERIMENTAL/org-e-html.el (org-e-html-export-snippet): Use new
function.
* EXPERIMENTAL/org-e-latex.el (org-e-latex-export-snippet): Use new
function.
* EXPERIMENTAL/org-e-odt.el (org-e-odt-export-snippet): Use new
function.
* testing/contrib/lisp/test-org-export.el: Add test.
The idea behind this change is that a given back-end may decide to
keep an export snippet not directly targetted at it (i.e. a beamer
back-end that would want to keep latex snippets). Hence, filtering
snippets is on back-ends side, and a new function is added to help
them in that task.
* contrib/lisp/org-element.el (org-element-headline-parser): COMMENT
and QUOTE keywords, ARCHIVE tags are case sensitive.
* testing/contrib/lisp/test-org-element.el: New file.
* contrib/lisp/org-export.el (org-export-collect-tree-properties):
Remove `:use-select-tags' property.
(org-export-populate-ignore-list): Renamed from
`org-export-get-ignore-list'.
(org-export--selected-trees): Renamed from
`org-export-use-select-tag-p'.
(org-export--skip-p): Use an additional argument to specify list of
trees containing a select tag.
(org-export-select-tags, org-export-exclude-tags,
org-export-with-priority): Change doc-string.
* testing/contrib/lisp/test-org-export.el: Tests modified
accordingly.
* contrib/lisp/org-element.el: Move archived tree handling out of
org-element-map.
* contrib/lisp/org-export.el (org-export-get-ignore-list): Properly
ignore archived with `org-export-with-archived-trees' set to
`headline'.
* testing/contrib/lisp/test-org-export.el (test-org-export/handle-options):
Add a test for that.
* contrib/lisp/org-export.el (org-export-get-inbuffer-options): Fix
but with incomplete macros returning an error. Also with behaviour
`nil', only insert new value if none was defined before.
(org-export-use-select-tags-p): Fix bug preventing it from properly
detecting select-tags.
(org-export--skip-p): Small refactoring
* testing/contrib/lisp/test-org-export.el: New test file.
* contrib/lisp/org-export.el (org-export-get-parent): New function.
(org-export-data, org-export-get-previous-element,
org-export-get-next-element): Use new function.
* EXPERIMENTAL/org-e-ascii.el (org-e-ascii-item): Use new function.
Refactor code.
(org-e-ascii-paragraph): Use new function.
* EXPERIMENTAL/org-e-latex.el (org-e-latex-item): Use new function.
* EXPERIMENTAL/org-e-html.el (org-e-html-item): Use new function.
* EXPERIMENTAL/org-e-odt.el (org-e-odt-item): Use new function.
* EXPERIMENTAL/org-e-ascii.el (org-e-ascii--current-text-width,
org-e-ascii-item, org-e-ascii-paragraph): Apply `:genealogy' removal.
* EXPERIMENTAL/org-e-latex.el (org-e-latex-item): Apply `:genealogy'
removal.
* contrib/lisp/org-element.el (org-element-map): Do not compile
genealogy. Also use `:ignore-list' when possible.
* contrib/lisp/org-export.el (org-export-collect-tree-properties):
Populate `:ignore-list' before starting to transcode each element in
subtree.
(org-export-get-min-level): Use `:ignore-list'.
(org-export--skip-p): Renamed from `org-export-skip-p'. This is now
an internal function.
(org-export-data): Use and update `:ignore-list'. Do not update
genealogy.
(org-export-ignore-element): New function
(org-export-last-sibling-p): Small refactoring.
(org-export-resolve-fuzzy-link): Apply `:genealogy' removal.
(org-export-get-genealogy): Use a more efficient algorithm.
The equivalent of (plist-get info :genealogy) is
now (org-export-get-genealogy blob info), blob being any element or
object.
This is based on org-e-html. It can create simple documents. Lots of
cleanups will follow. With this change, org-e-html and org-e-odt can
develop independently.
* contrib/lisp/org-element.el (org-element-object-restrictions):
Modify docstring.
(org-element-secondary-value-alist): New variable.
(org-element-map): Possibly look into secondary strings when mapping
through objects. Also sanitize some function names.
* EXPERIMENTAL/org-e-ascii.el (org-e-ascii--unique-links): Make use of
org-element-map improvement.
* EXPERIMENTAL/org-e-ascii.el (org-e-ascii-item): Use new
`org-list-get-item-number' function.
* contrib/lisp/org-element.el (org-element-item-interpreter): Use new
`org-list-get-item-number' function.
* contrib/lisp/org-element.el (org-element-string-restrictions): Allow
targets in tables. Also fix wrong symbol for verse-blocks.
(org-element-verse-block-parser): Apply change.
2012-01-17 Jambunathan K <kjambunathan@gmail.com>
* etc/styles/OrgOdtContentTemplate.xml
(OrgIndentedSection-Level-*): New section styles. These
sections are indented to the same level as the corresponding
list entries. These sections hold tables that occur within a
list.
(OrgTable): Increased relative width from 90% to 96% for
aesthetic reasons.
* lisp/org-odt.el (org-odt-table-indentedp): New variable
(org-odt-begin-table): Modified. If the table is within a
list, temporarily leave the list and begin an indented section
before emitting the table.
(org-odt-end-table): Modified. If the table was within a
list, close the indented section and re-open the list
immediately after ending the table.
(org-odt-continue-list, org-odt-discontinue-list): Helper
routines to temporarily discontinue and continue a list.
(org-odt-list-stack-stashed): New variable to hold the state
of a pending list.
(org-odt-begin-list, org-odt-begin-list-item)
(org-odt-end-list-item): Modified. Handle nitty-gritties for
continuing a list and list item.
(org-odt-section-count): New variable that keeps track of
section count. Used in conjunction with naming of sections.
(org-odt-begin-section, org-odt-end-section): New defuns.
(org-odt-init-outfile): Initialize
`org-odt-list-stack-stashed' and `org-odt-section-count'.
* lisp/org-lparse.el (org-lparse-list-item-count): Removed. Was a
superfluous variable.
(org-lparse-list-level): Removed. Now derived from
`org-lparse-list-stack'.
(org-lparse-list-stack): New. List that records the list
types - ordered, unordered or descriptive - in the following
order: self, parent, grand-parent etc.
(org-do-lparse): Added, removed above let-bound vars.
Disallowed regular tables within list-table block.
(org-lparse-begin-list, org-lparse-end-list)
(org-lparse-begin-list-item, org-lparse-end-list-item):
Propagate above changes.
OpenDocument doesn't permit tables to occur in the middle of a
list. Use list continuations and indented sections to typeset
indented tables.
Fixes the following bug:
http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00515.html
Add support for indented tables in ODT export
2012-01-20 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-format-textbox): Honor user-specified
width in captioned images.
Fix for bug reported here:
http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00641.html
Honor user-specified width in captioned images
2012-01-23 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-table-style-format): New. Template for
auto-generated table styles.
(org-odt-automatic-styles, org-odt-object-counters): New
variables.
(org-odt-add-automatic-style): New function.
(org-odt-write-automatic-styles): New function. Create
automatic styles for tables that have custom :rel-width.
(org-odt-begin-table): Parse attributes specified with
"#+ATTR_ODT: " option and use it to create an automatic table
style.
(org-odt-save-as-outfile): Call
`org-odt-add-write-automatic-styles'.
(org-odt-init-outfile): Init newly add variables.
(org-odt-section-count): Remove it.
(org-odt-begin-section): Use `org-odt-add-automatic-style' to
generate an automatic section name.
Customize table width using :rel-width option. For example,
to create a table of width 60% use:
#+attr_odt: :rel-width 60
| A | B |
|---+---|
| | |
org-odt.el: Put table width under user-control
2012-01-23 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-label-styles): Add a new style.
(org-odt-category-map-alist): Use it.
Andreas Leha writes:
The following snippet exports correctly to LaTeX and to html, but
produces the text "Figure Figure" in odt.
Could the behaviour be synchronized?
=== example.org ==========================
* Test ref
plot(1:10, 1:10)
Here is a reference to Figure \ref{fig:bar}
=== example.org ==========================
org-odt.el: Make label references consistent with LaTeX export
2012-01-24 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-entity-frame-styles): Add frame params
for images that are anchored as character.
(org-export-odt-format-image): Handle new anchor type
"as-char".
(org-export-odt-default-image-sizes-alist): Misc. change.
(org-export-odt-format-formula): Misc. change.
With this change, one can use the below snippet to produce
images that are laid out side-by-side.
#+ATTR_ODT: :width 7 :height 7 :anchor as-char
#+header: :file foo.png
[[./foo.png]]
#+caption: bar
#+ATTR_ODT: :width 7 :height 7 :anchor as-char
#+header: :file bar.png
[[./bar.png]]
See http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00677.html.
org-odt.el: Allow images to be anchored as characters
2012-01-24 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-export-odt-format-formula): Use :style
property to specify custom table styles.
Continuation of the earlier commit titled: "Put table width
under user-control".
org-odt.el: Fix regression in typesetting of MathML formulae
2012-01-27 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-format-preamble): Don't insert TOC here.
Delay it till the end of export.
(org-odt-begin-document-body): Make a note of the default
position of TOC in `org-lparse-dyn-first-heading-pos'.
(org-odt-insert-toc): Insert TOC as directed by
[TABLE-OF-CONTENTS] line or at the default position.
(org-odt-end-export): Call `org-odt-insert-toc'.
Fix for the following bug:
http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00974.html
org-odt.el: Honor "[TABLE-OF-CONTENTS]" directive
2012-01-27 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Fix earlier commit
2012-01-30 Jambunathan K <kjambunathan@gmail.com>
* OrgOdtStyles.xml (OrgTitlePage): New page style. Include no
footer. Use "OrgFrontMatterPage" for the following page.
(OrgFrontMatterPage): New page style. Include a footer that
displays page numbers in Roman style. Use mirrored pages.
Use "OrgFrontMatterPage" for the following page.
(OrgPage): New page style. Include a footer that displays
page numbers. Use mirrored pages. Use "OrgPage" for the
following page.
(OrgFirstPage): New page style. Include a footer that
displays page numbers. Right page only. Use "OrgPage" for
the following page.
(Standard): Modify to include a footer that displays page
numbers. Use mirrored pages. Use "Standard" for the
following page.
None of the above page styles have a header.
The newly added page styles are not used as yet.
org-odt.el: By default, include page numbers in the page footer
2012-01-31 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Do `clear-image-cache' before `create-image'
2012-02-03 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-lparse.el (org-lparse-do-convert): Replace
`call-process' with `shell-command-to-string'.
* lisp/org-odt.el (org-export-odt-convert-processes): Add a new
converter which depends solely on LibreOffice and nothing
else.
(org-export-odt-convert-process): Make the above native
converter the default.
Thanks to Giles for introducing the "--convert-to" option of
soffice.exe. The option seems to be a fairly recent
development.
http://imperfectsoftware.blogspot.in/2012/01/one-of-my-less-enjoyable-tasks-is-to.html
With this change, one can export to pdf via odt by a simple
(setq org-export-odt-preferred-output-format "pdf")
There is no need to install additional converters.
org-odt.el: Make LibreOffice the default converter
2012-02-09 Jambunathan K <kjambunathan@gmail.com>
* org-odt.el (org-export-odt-convert-capabilities): Change the
default value.
See http://lists.gnu.org/archive/html/emacs-orgmode/2012-02/msg00293.html.
Offer "docx" as an option in `org-export-odt-preferred-output-format'
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Fix indentation
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Tag all custom variables with Emacs version
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-export-odt-convert-processes): Re-define
(org-export-odt-convert-capabilities): Fix an accidental
regression.
* lisp/org-lparse.el (org-lparse-do-convert): Related change.
Simplify definition of `org-export-odt-convert-processes'
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
Retire support for BasicODConverter
2012-02-14 Jambunathan K <kjambunathan@gmail.com>
* org-odt.el (org-export-as-odt-to-buffer)
(org-replace-region-by-odt, org-export-region-as-odt): Remove
these interactive functions. They are of questionable value.
org-odt.el: Remove interactive functions of questionable value
2012-02-15 Jambunathan K <kjambunathan@gmail.com>
Improve converting from ODT to other formats
2012-02-15 Jambunathan K <kjambunathan@gmail.com>
* org-odt.el (org-export-odt-image-size-probe-method)
(org-odt-do-image-size): Use imagemagick preferentially to
determine image sizes.
See http://lists.gnu.org/archive/html/emacs-orgmode/2012-02/msg00288.html
org-odt.el: Use imagemagick to determine image sizes
2012-02-16 Jambunathan K <kjambunathan@gmail.com>
* org.texi (Top, OpenDocument Text export)
(ODT export commands, Extending ODT export)
(Images in ODT export, Tables in ODT export)
(Configuring a document converter): Add or Update.
org.texi: Update ODT section
