Patch by Jan Böker.
Jan writes:
> What is this?
> =============
>
> This patch changes the way extension regexps in `org-file-apps' are
> handled. Instead of against the file name, the regexps are now matched
> against the whole link, and you can use grouping to extract link
> parameters which you can then use in a command string to be executed.
>
> For example, to allow linking to PDF files using the syntax
> file:/doc.pdf::<page number>, you can add the following entry to
> org-file-apps:
>
> Extension: \.pdf::\([0-9]+\)\'
> Command: evince "%s" -p %1
>
> In a command string to be executed, the parameters can be referenced
> using %1, %2, etc. Lisp forms can access them using (string-match n link).
>
>
> Where to get it?
> ================
> Either apply the patch by hand or
>
> git pull git://github.com/jboecker/org-mode.git org-file-apps-parameters
>
>
> What's next? / Feedback
> =======================
>
> - Find the bugs. Since this messes with links, a central concept of Org,
> I probably have missed some edge cases; so please test this and
> report if it works for you.
>
> I also appreciate any feedback on code quality or the design decisions
> made. I am learning elisp along the way, so you may be able to write
> some changes in a more idiomatic and/or elegant way.
>
> - Add a mechanism for org-mode modules to add default values to
> org-file-apps, similar to the variables org-file-apps-defaults-*.
> This could be used by modules to define their own extensions to the
> syntax of file: links.
>
> - Modify org-docview.el to use this and deprecate the docview: link syntax.
>
>
> What does it (intentionally) break?
> ===================================
>
> This patch introduces a backwards-incompatible change. If LINE or SEARCH
> is given, the file is no longer guaranteed to open in emacs: if IN-EMACS
> is nil and an entry in org-file-apps matches, that takes precedence.
>
> A grep of the lisp/ and contrib/ directories showed that no code in the
> org-mode distribution was relying on this behaviour; whereever LINE or
> SEARCH is given, IN-EMACS is also set to t.
>
> I decided against adding an additional parameter because that would be
> redundant; the original link as seen by org-open-at-point can be
> reconstructed from PATH, LINE and SEARCH.
>
> I am not that sure if this is the right way to do this, but it seems to
> break as little as possible while hopefully avoiding to add too much
> complexity.
Dan Davison writes:
> Bug report
> ==========
> If I have this:
>
> A [[file:zz.org::#mytarget][link]] to a target with a custom ID
>
> and export it to HTML, I get
>
> A <a href="zz.html##mytarget">link</a> to a target with a custom ID
>
> which (in firefox on linux) links to the file but does not jump to the
> target. However, if I change the '##' to '#' then firefox jumps to the
> correct location. Is this an org bug?
>
> Very tentatively proposed patch
> ===============================
> I've investigated a bit (notes below), resulting in this proposed patch:
>
> --8<---------------cut here---------------start------------->8---
> diff --git a/lisp/org-html.el b/lisp/org-html.el
> index aa70408..5ee5b19 100644
> --- a/lisp/org-html.el
> +++ b/lisp/org-html.el
> @@ -1110,7 +1110,7 @@ lang=\"%s\" xml:lang=\"%s\">
> (abs-p (file-name-absolute-p filename))
> thefile file-is-image-p search)
> (save-match-data
> - (if (string-match "::\\(.*\\)" filename)
> + (if (string-match "::#?\\(.*\\)" filename)
> (setq search (match-string 1 filename)
> filename (replace-match "" t nil filename)))
> (setq valid
> --8<---------------cut here---------------end--------------->8---
>
> Doc patch
> =========
> The link above (file:zz.org::#mytarget) was created by C-c l on a
> heading with a CUSTOM_ID property. However, I couldn't see where in the
> manual links of this form are documented. Do we need to add this link
> type to section 4.7 "Search options in file links", e.g.
>
> --8<---------------cut here---------------start------------->8---
> diff --git a/doc/org.texi b/doc/org.texi
> index f49f056..c8cc1a5 100644
> --- a/doc/org.texi
> +++ b/doc/org.texi
> @@ -3116,6 +3116,7 @@ link, together with an explanation:
> [[file:~/code/main.c::255]]
> [[file:~/xx.org::My Target]]
> [[file:~/xx.org::*My Target]]
> +[[file:~/xx.org::#my-custom-id]]
> [[file:~/xx.org::/regexp/]]
> @end example
>
> @@ -3130,6 +3131,8 @@ link will become an HTML reference to the corresponding named anchor in
> the linked file.
> @item *My Target
> In an Org file, restrict search to headlines.
> +@item #my-custom-id
> +Link to a heading with a @code{CUSTOM_ID} property
> @item /regexp/
> Do a regular expression search for @code{regexp}. This uses the Emacs
> command @code{occur} to list all matches in a separate window. If the
> --8<---------------cut here---------------end--------------->8---
>
> Notes
> =====
> At line 1134 of org-html.el there is
>
> (setq thefile (concat thefile "#"
> (org-solidify-link-text
> (org-link-unescape search)))))
>
> during evaluation of which 'search is bound to "#mytarget", which
> suggested that the problem might be in the regexp parsing creating
> 'search.
Patch by Dan Hackney.
Dan Hackney writes:
> For paragraph text, `org-adaptive-fill-function' did not handle the
> base case of regular text which needed to be filled. This commit saves
> a buffer-local value of `adaptive-fill-regexp' and uses it if none of
> the org-specific regexps match. This allows email-style ">" comments
> to be filled correctly.
org-agenda.el (org-agenda-include-deadlines): Added new
customization variable to determine whether unscheduled tasks
should appear in the agenda solely because of their deadline.
Default to true, which was the previous behavior (it just wasn't
configurable).
(org-agenda-mode-map, org-agenda-view-mode-dispatch): Bind ! in
the agenda to show/hide deadline tasks.
(org-agenda-menu): Added menu option for show/hide deadlines.
(org-agenda-list): Make the agenda list sensitive to the value of
`org-agenda-include-deadlines'.
(org-agenda-toggle-deadlines): New function to toggle the value of
`org-agenda-include-deadlines' and repaint the modeline
indicators.
(org-agenda-set-mode-name): Show "Deadlines" in the agenda
modeline if deadline tasks are being displayed.
Jambunathan K. writes:
> I would like to add the following observation as well -
>
> ---> org input <---
> #+AUTHOR: Jambunathan K\cr\href{mailto:{{{EMAIL}}}}{{{{EMAIL}}}}
>
> ---> actual tex output <---
> \author{Jambunathan K\cr\href{mailto:kjambunathan@gmail.com}\{kjambunathan@gmail.com\}}
>
> The above tex snippet has the effect of getting the "Url Box" wrong.
>
> I was hoping to produce the following line -
> \author{Jambunathan K\cr\href{mailto:kjambunathan@gmail.com}{kjambunathan@gmail.com}}
>
> Generally speaking, macro expansion in author string behaves strangely.
Eric Fraga writes:
> What am I missing? I tried exporting the following to HTML and the
> caption and HTML attributes seem to be ignored completely. Also, the
> alignment directives are ignored as well.
>
> --8<---------------cut here---------------start------------->8---
> #+TITLE: test file for org mode
> #+DESCRIPTION: used for bug reports
> #+AUTHOR: Eric S Fraga
> #+EMAIL: Eric S Fraga <e.fraga@ucl.ac.uk>
> #+DATE: 2010-03-11 Thu
> #+KEYWORDS:
> #+LANGUAGE: en
> #+OPTIONS: H:3 num:t toc:t \n:nil @:t ::t |:t ^:t -:t f:t *:t <:t
> #+OPTIONS: TeX:t LaTeX:t skip:nil d:nil todo:t pri:nil tags:not-in-toc
> #+INFOJS_OPT: view:nil toc:nil ltoc:t mouse:underline buttons:0 path:http://orgmode.org/org-info.js
> #+EXPORT_SELECT_TAGS: export
> #+EXPORT_EXCLUDE_TAGS: noexport
> #+LINK_UP:
> #+LINK_HOME:
>
> * tables
>
> #+caption: A very interesting table
> #+attr_html: border="1" rules="all" frame="all" align="center"
> | <r> | <l> |
> | Id | Description |
> |-----+--------------------------------|
> | 1. | The first item |
> | 2. | the second |
> | 4. | we don't have a third one |
> | 10. | a longer id to check alignment |
> |-----+--------------------------------|
> --8<---------------cut here---------------end--------------->8---
>
> I'm using org current as of yesterday Org-mode version 6.34trans
> (release_6.34c.186.g1902) and with GNU Emacs 23.1.1
> (i486-pc-linux-gnu, GTK+ Version 2.18.2) of 2009-11-02 on raven,
> modified by Debian
Tom writes:
> When archiving trees I'd like to see the archived items in
> reverse chronological order at the archive location, so if I jump
> to the header under which stuff is archived I would see the most
> recent item at the top.
>
> When searching for something in the archives it is much more
> frequent that I'm looking for something recently archived than
> something archived months ago, so the reserved order would make
> more sense to me.
>
> Is there a setting which tells the archiving command to insert
> the archived tree as first child of the archive location,
> instead of the last?
Patch by Matt Lundin
Matt writes:
> Below is a patch I've been using to speed up the construction of
> agenda views limited to certain types of entries (e.g., timestamps and
> sexps). Previously, I had constructed "calendar" views consisting
> only of timestamps and sexps by using the variable
> org-agenda-skip-function to exclude scheduled items and deadlines from
> the agenda. This, however, proved somewhat slow (3-4 seconds for
> weekly calendars, 10-12 seconds for monthly calendars). The patch
> below cuts the times to 1 and 3 seconds respectively. I believe it
> provides an efficient alternative to the skip function by allowing the
> user to tweak the arguments passed to org-agenda-get-day-entries.
John Wiegley writes:
> I have the following data in my Org-mode file:
>
> #+LINK: cegbug https://portal/bugzilla/show_bug.cgi?id=
>
> ** TODO [[cegbug:351][#351]] Bizcard: Fix Maven build setup
> - State "TODO" from "STARTED" [2010-03-01 Mon 14:42]
>
> Now, in the Agenda and in the Org-mode buffer, everything looks fine.
> I can also use C-c C-o if my cursor is within the #<NUMBER> text.
>
> However, if I'm in the Agenda and I hit C-c C-o, it says 'No match'
> after about a second. Is there any reason I can't open these links
> from the Agenda view?
William Henney writes:
> Anyone have a clue what is going on here?
>
> Cheers
>
> Will
>
> * Arctan2 bug
> Activate the formula editor for the following table with =C-c '=, then
> exit without changing anything. Note what happens to the arctan2
> formula. For me, "arctan2" changes to "@2$20173232".
> | x | y | arctan | arctan2 |
> |---+---+--------+---------|
> | 1 | 1 | 45 | 45. |
> #+TBLFM: $3=arctan($1/$2)::$4=arctan2($1,$2)
>
> ** Versions
> Org 6.34trans, Aquamacs 2.0preview4, Emacs 23.1.92.1
Daniel Clemente writesL
> Hi, I found an HTML export bug with org-mode 6.34c-140-g44c8 and
> older. I used:
>
> --------------------------------------------------------
> * only one section
> #+BEGIN_EXAMPLE:
>
> We need:
> ,* pears
> ,* lettuce
> ,* watermelons
>
> Very important!
> #+END_EXAMPLE:
> --------------------------------------------------------
>
> And the outputed table of contents had this code:
>
> --------------------------------------------------------
> <div id="text-table-of-contents">
> <ul>
> <li><a href="#sec-1">1 only one section </a></li>
> <li><a href="#sec-2">2 pears</a></li>
> <li><a href="#sec-3">3 lettuce</a></li>
> <li><a href="#sec-4">4 watermelons</a></li>
> </ul>
> </div>
> --------------------------------------------------------
>
> This is wrong because the asterisks inside the example don't
> represent headers. There should be only one header.
Lukasz Stelman writes:
I've create some presentation on programming (some more to do) and to my
surprise I've discovered that if org-mode escapes one "&" properly it
doesn't do its job in case of "&&" (and a single "^" too). I get "\&&"
in latex file which of course is wrong.
This support was totally broken. It works now again. Unfortunately
it is not possible to edit the table directly in the org-mode buffer
anymore - to edit such a table, you have to use C-c '
This patch implements reading American dates, like
2/5/3 --> 2003-02-05
2/5 --> ????-02-05
Is also fixes a bug that would force the current year when reading a
date like 2/5 (American) or 2-5 (ISO), and in this way would prevent
`org-read-date-prefer-future' to do its job. This bug was reported by
Lukasz Stelmach.
The `org-clock-set-current' and `org-clock-delete-current' functions
handle this variable. The variable only stores the last clocked in
entry, not the history of clocked in tasks.
This can help to get out of an inconsistent state produce for example
by viewing from the agenda. Reported by Matt Lundin:
> I'd like to report a minor issue with org-agenda-goto and inline tasks.
> Let's say one has the following file:
>
> --8<---------------cut here---------------start------------->8---
> * Here is an entry.
> Blah blah blah blah.
> *************** Here is an inline task.
> *************** END
> Blah blah blah blah blah.
> *************** TODO Here is a second inline task.
> *************** END
> Blah blah blah blah blah.
> *************** Here is a third inline task
> *************** END
> Blah blah blah blah blah.
> --8<---------------cut here---------------end--------------->8---
>
> Let's say one also has the following settings:
>
> --8<---------------cut here---------------start------------->8---
> (setq org-show-hierarchy-above t)
> (setq org-show-siblings '((default . nil) (isearch . t) (agenda . t)))
> (setq org-show-entry-below '((default . nil) (isearch . t) (agenda . t)))
> --8<---------------cut here---------------end--------------->8---
>
> If 1) one tries to jump to the TODO from the agenda and 2) the entry is
> currently folded, org-show-context reveals only the headlines. E.g.,
>
> --8<---------------cut here---------------start------------->8---
> * Here is an entry.
> *************** Here is an inline task.
> *************** END...
> *************** TODO Here is a second inline task.
> *************** END...
> *************** Here is a third inline task
> *************** END...
> --8<---------------cut here---------------end--------------->8---
>
> Invoking org-cycle on the END headline does nothing, since all headlines
> deeper than org-inlinetask-min-level are exempted from cycling. As a
> result, the only way to reveal the text in the entry is to cycle the
> parent twice (first to close, then to reveal).
Ruud Brekelmans writes about problems with spurious footnotes:
> I still find similar behavior when exporting to LaTeX with:
>
> #+BEGIN_LaTeX
> \newcommand{\norm}[1]{\lVert#1\rVert}
> #+END_LaTeX
Emilio Arias writes:
> egallego@babel.ls.fi.upm.es (Emilio Jesús Gallego Arias) writes:
>
> To reproduce save this minimal org file:
>
> #+STARTUP: even
> * A
> :PROPERTIES:
> :ARCHIVE: a
> :END:
> ** B :ARCHIVE:
> Some text
>
> and hit TAB when in the * A headline; then the ** B headline contents
> will be incorrectly shown.
>
> I've found the culprit in org-hide-archived-subtrees:
>
> ,----
> | (defun org-hide-archived-subtrees (beg end)
> | "Re-hide all archived subtrees after a visibility state change."
> | (save-excursion
> | (let* ((re (concat ":" org-archive-tag ":")))
> | (goto-char beg)
> | (while (re-search-forward re end t)
> | (and (org-on-heading-p) (org-flag-subtree t))
> | (org-end-of-subtree t)))))
> `----
>
> The problem is that the RE matches the first archive "property" and
> then does an org-end-of-subtree which skips all the subtrees of the
> parent tree where the ARCHIVE property is located.
>
> I've replaced this part
>
> | (and (org-on-heading-p) (org-flag-subtree t))
> | (org-end-of-subtree t)))))
>
> by
>
> | (when (org-on-heading-p)
> | (org-flag-subtree t)
> | (org-end-of-subtree t)))))))
>
> so org-end-of-subtree is only called if we are really in a headline. I
> think that makes sense.
>
Wes Hardaker writes:
> Attached is a patch that lets local variables define whether or not todo
> dependency blocking should be used (both for TODOs and for checkboxes).
> I have one file in particular that I'm using checkboxes to quickly
> indicate multi-selections from a list but for most of my files I want
> TODOs blocked by uncompleted checkboxes.
>
> Normally org uses hook methods for checking for TODO blocks and this
> patch just inserts a check at the top to test and see if the variable
> turning on the blocking type is still set.
zwz writes:
> I use org-remember for my contact records.
>
> This is a template in org-remember-templates
> ("Contact" ?c "* %^{Name} \n%[~/.contact]\n" "contact.org" "Contacts")
>
> the content of the file "~/.contact":
> :PROPERTIES:
> :Mobile: %^{mobile}
> :Email:
> :Added: %u
> :END:
>
> I found that the prompt "%^{mobile}" works, but *the inactive time stamp "%u"
> does not.* It is not replaced.
>
> I guess it is a bug.
Bill Jackson writes:
> When exporting to LaTeX, curly brackets in a command will be escaped
> if that command also contains angle brackets. This can be a problem
> when using beamer. An example input file:
>
> ------------------------------------------------------------------------
>
> #+LaTeX_CLASS: beamer
>
> * The One and Only Frame
> When LaTeX \alert<2>{commands} contain angle brackets, the curly
> brackets are erroneously escaped in the output. \alert{Commands}
> that do not contain angle brackets work properly.
>
> ------------------------------------------------------------------------
>
> Typing C-c C-e l will generate the output file:
>
> ------------------------------------------------------------------------
>
> % Created 2010-01-15 Fri 13:57
> \documentclass{beamer}
> \usepackage[latin1]{inputenc}
> \usepackage[T1]{fontenc}
> \usepackage{graphicx}
> \usepackage{longtable}
> \usepackage{float}
> \usepackage{wrapfig}
> \usepackage{soul}
> \usepackage{amssymb}
> \usepackage{hyperref}
>
>
> \title{escCurly}
> \author{}
> \date{15 January 2010}
>
> \begin{document}
>
> \maketitle
>
> \begin{frame}
> \frametitle{Outline}
> \setcounter{tocdepth}{3}
> \tableofcontents
> \end{frame}
>
> \begin{frame}
> \frametitle{The One and Only Frame}
> \label{sec-1}
>
> When \LaTeX{} \alert<2>\{commands\} contain angle brackets, the curly
> brackets are erroneously escaped in the output. \alert{Commands}
> that do not contain angle brackets work properly.
> \end{frame}
>
> \end{document}
Bill Jackson writes:
> When exporting to LaTeX, the commands \LaTeX and \TeX are not
> processed consistently. In particular, the backslash for \LaTeX is
> escaped. This might not be a bug, but it is a bit confusing. An
> example input file:
>
> ------------------------------------------------------------------------
>
> * The One and Only Header
> The command \LaTeX generates an escaped backslash, while \TeX and
> \alpha do not. Note that LaTeX is converted to a command, while TeX
> is not.
>
> ------------------------------------------------------------------------
>
> Typing C-c C-e l will generate the output file:
>
> ------------------------------------------------------------------------
>
> % Created 2010-01-15 Fri 13:47
> \documentclass[11pt]{article}
> \usepackage[latin1]{inputenc}
> \usepackage[T1]{fontenc}
> \usepackage{graphicx}
> \usepackage{longtable}
> \usepackage{float}
> \usepackage{wrapfig}
> \usepackage{soul}
> \usepackage{amssymb}
> \usepackage{hyperref}
>
>
> \title{escLaTeX}
> \author{}
> \date{15 January 2010}
>
> \begin{document}
>
> \maketitle
>
> \setcounter{tocdepth}{3}
> \tableofcontents
> \vspace*{1cm}
> \section{The One and Only Header}
> \label{sec-1}
>
> The command \\LaTeX{} generates an escaped backslash, while \TeX and
> $\alpha$ do not. Note that \LaTeX{} is converted to a command, while TeX
> is not.
>
> \end{document}
The coding system of the LaTeX class will now only be set to the value
corresponding to the buffer's file coding system if the class
specifies \usepackage[AUTO]{inputenc}. Any other value for the coding
system will not be modified.
Jan Böcker writes:
> Consider the following situation:
>
> * A
> Some text.
> * B
>
> - Place the cursor on A, press C-x n w (org-narrow-to-subtree).
> - Go to the very end of the buffer and insert "xyz".
> - C-x n w (widen).
>
> You end up with:
>
> * A
> Some Text
> xyz* B
Patch by Stephen Eglen, who writes:
> Just a small suggestion here. In the agenda, an entry like:
> * <2010-01-20 Wed 09:00-09:30> test
>
> gets formatted as follows:
>
> Wednesday 20 January 2010
> 8:00...... ----------------
> test: 9:00- 9:30 test
> 10:00...... ----------------
>
> the leading whitespace before '9:00' and '9:30' is needed to align the
> times, but having the space after the dash looks odd (at least to my
> latex-trained eyes). Would it be possible to patch org-agenda to put a
> leading zero rather than leading whitespace. With this patch, I see:
>
> Wednesday 20 January 2010
> 08:00...... ----------------
> test: 09:00-09:30 test
> 10:00...... ----------------
This patch introduces a new user option to select this behavior.
Stephen Eglen writes
> Within the agenda buffer, if I type 'i j' to jump to the current date I
> get:
>
> Debugger entered--Lisp error: (void-function org-datetree-find-date-create)
> org-datetree-find-date-create((1 20 2010))
> org-agenda-diary-entry-in-org-file()
> org-agenda-diary-entry()
> call-interactively(org-agenda-diary-entry nil nil)
>
> If I then do M-x load-library org-datetree
>
> and repeat 'i j', it works. Should this function be autoloaded?
Geert Kloosterman writes:
> When an org link is created from an URL containing a hex escape
> `org-make-link-string' creates a link that ends up corrupted the moment
> it is followed (e.g. using `org-open-at-point').
>
> I've traced this back to `org-link-escape' and `org-link-unescape'. The
> following shows how the hex code "%2B" is converted to a "+" after an
> escaping round trip:
>
> (org-link-unescape (org-link-escape
> "http://some.host.com/form?&id=blah%2Bblah"))
> ==>
> "http://some.host.com/form?&id=blah+blah"
>
> In my case this small change ended up in a broken URL.
>
> Additionally, when the URL-escape happens to be in lower case (or
> otherwise not present in `org-link-escape-chars') we end up with an
> error:
>
> (org-link-unescape (org-link-escape
> "http://some.host.com/form?&id=blah%2bblah"))
> ==>
> Debugger entered--Lisp error: (wrong-type-argument characterp nil)
> char-to-string(nil)
> ...
>
> When `org-url-encoding-use-url-hexify' is set to `t' we do get a proper
> round trip of the URL containing hex-escapes:
>
> (setq org-url-encoding-use-url-hexify t)
> (org-link-unescape (org-link-escape
> "http://some.host.com/form?&id=blah%2bblah"))
> ==>
> "http://some.host.com/form?&id=blah%2bblah"
>
>
> Setting `org-url-encoding-use-url-hexify' does not fix the complete
> problem however: `org-open-at-point' still did not end up with the
> proper URL. Within `org-open-at-point' there is another call to
> `org-link-escape':
>
> (org-link-escape path org-link-escape-chars-browser)
>
> This time a mapping table is passed in explicitly (the second argument).
> However, when `org-url-encoding-use-url-hexify' is set,a this mapping
> table isn't used, resulting (again) in a broken URL.
>
> I have attached a patch that fixes the problem: do not use url-hexify in
> `org-link-escape' and `org-link-unescape' when an explicit mapping table
> has been specified.
>
> In summary:
> - the default behaviour of `org-link-escape', with
> `org-url-encoding-use-url-hexify' set to nil, has some issues with
> handling URLS which contain url-encoded hex escapes
> - when a mapping table is passed to `org-link-escape' and
> `org-link-unescape', they should probably not use url-hexify.
> Patch attached.
The variable `org-clock-out-when-done' can now also be a list of
states. When the TODO state of a task changes to one of these states,
the clock will stop running in that task.
This extension of the logic was a proposal by Ricard Riley.
Marting G. Skjaeveland writes:
> I pulled a fresh copy of org-mode this morning and noticed that
> references to source code line numbers no longer work as they used
> to. Instead of displaying the number of the line with the label, the
> label is displayed.
>
> Exporting the following example, retrieved from the online
> documentation (http://orgmode.org/manual/Literal-examples.html),
>
> -------------------------------------start
> #+BEGIN_SRC emacs-lisp -n -r
> (save-excursion (ref:sc)
> (goto-char (point-min)) (ref:jump)
> #+END_SRC
>
> In line [[(sc)]] we remember the current position. [[(jump)][Line
> (jump)]] jumps to point-min.
>
> -------------------------------------end
>
> gives me in latex export
>
> -------------------------------------start
> \begin{verbatim}
> 1: (save-excursion
> 2: (goto-char (point-min))
> \end{verbatim}
>
> In line \hyperref[(sc)]{(sc)} we remember the current
> position. \hyperref[(jump)]{Line (jump)} jumps to point-min.
> -------------------------------------end
>
Patch by Stephan Schmitt, who writes:
> An error was thrown when all tags of a headline are hidden by
> org-agenda-hide-tags-regexp (in this case the function
> get-text-property got nil as third argument)
Manish writes:
> I noticed a small inconsistency. If you start with following sample
> org file and press C-c C-c in the first cookie, it doesn't get updated
> correctly whereas the second one does. The only difference is that
> one has children TODO tasks and the other has a list of checkboxes.
>
> Starting file:
>
> --8<---------------cut here---------------start------------->8---
> * Item 1 [/]
> 1. [X] line 1
> 2. [ ] line 2
> * Item 2 [/]
> *** TODO Sub-item 2.1
> *** DONE Sub-item 2.2
> --8<---------------cut here---------------end--------------->8---
>
> Status after C-c C-c in the summary cookie.
>
> --8<---------------cut here---------------start------------->8---
> * Item 1 [0/0]
> 1. [X] line 1
> 2. [ ] line 2
> * Item 2 [1/2]
> *** TODO Sub-item 2.1
> *** DONE Sub-item 2.2
> --8<---------------cut here---------------end--------------->8---
Charles Sebold writes:
> This is with a clean Emacs, nothing in .emacs except for what is
> necessary to add my org-mode lisp directory to the load path and
> (require 'org-install), Emacs pulled down from bzr this morning, and
> current git download of org-mode, pulled a few minutes ago.
>
> With an org file like this:
>
> ------------------------------------------------------------------------
> * TODO Try out [[elisp:(org-version)][link problem]] if possible
> ------------------------------------------------------------------------
>
> Pull this into an agenda view, then put cursor over the link and try to
> follow it. The result is as follows:
Christopher Suckling writes:
> Thank you, but not quite working yet:
>
> ,----
> | #+BIND: org-export-latex-title-command ""
> `----
>
> now appears to be having the *effect* of setting a global variable.
>
> I load Emacs then visit the below test org file. I then export the file.
>
> I get a \maketitle line.
>
> I then C-c C-c on the #+BIND: line and re-export.
>
> \maketitle is removed.
>
> I then export another org file without the #+BIND: line.
>
> There is no \maketitle, even though there should be.
>
> I add
>
> ,----
> | #+BIND: org-export-latex-title-command "\foobar"
> `----
>
> to the new org file, C-c C-c and export:
>
> \foobar is added to the exported file.
>
> Finally, I re-export the original test org file (without C-c C-c on the
> #+BIND: line):
>
> \foobar is added to the exported file.
>
> However,
>
> ,----
> | C-h v org-export-latex-title-command
> `----
>
> always returns the value "\\maketitle", no matter what the value of the
> #+BIND: line.
>
> Best, Christopher
Oscar Fuentes writes:
> When a [/] is used on a header that does not contain subitems, pressing
> C-c C-c on it signals an error on the minibuffer:
>
> org-update-statistics-cookies: No data for statistics cookie
>
> and the cookie appears with the same face (text color) as if it were
> incomplete.
>
> IMHO, [/] on a header without subitems should show [0/0] with the same
> face used for the case where all subitems are done.
_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.orghttp://lists.gnu.org/mailman/listinfo/emacs-orgmode
file+sys:/path/to/file will use the system to open the file, like
double-clicking would
file+emacs:/path/to/file will force opening by Emacs
Also, when using C-c C-o on a headline of get a list of links in the
entry, pressing RET will open *all* links. This allows something like
projects to be defined, with a number of files that have to be opened
by different applications.
These were requests by John Wiegley.
Adam Spiers writes:
> I really like the way `M-x org-agenda C' takes you straight to the
> *Customize Option: Org Agenda Custom Commands* buffer. Similarly, it
> would be nice if `M-x org-remember C' took you straight to the
> *Customize Option: Org Remember Templates* buffer.
This does now work, but only if the user has no template defined for
the access letter `C'.
>
> Although in both cases it would be even nicer if the keystroke for
> this was customisable, as no doubt some people already have `M-x
> org-remember C' set up to do something else.
It is not customizable, like for the agenda....
PT writes:
> [Orgmode] org-read-date-prefer-future 'time doesn't always prefer future
>
> This is a very useful setting, because it allows the user to
> quickly schedule a task into the future by simply entering the
> time, but it doesn't always do the right thing.
>
> Suppose I scheduled a task to 1pm, but I didn't have time to deal
> with it during the day. It's 5pm now. If I want to reschedule the task to
> tomorrow 10am then I can write simply 10am to the time prompt and
> it puts the task correctly to tomorrow 10am. However, if I want
> to reschedule it to tomorrow 2pm then I can't write simply 2pm,
> because then it schedules the task at 2pm today (which is past
> already, since it's 5 pm).
>
> The problem is the feature uses the task's own scheduled time to
> determine if a time is in the past, instead of the current time.
>
>
> It's Org-mode version 6.33
Matt Lundin writes
> I believe that commit b8e0d6fdb4 broke
> accessing timestamps with the org-entry-get.
>
> With that commit, several functions I use to check whether an entry has
> a timestamp stopped working.
>
> In other words,
>
> (org-entry-get nil "TIMESTAMP_IA")
>
> or
>
> (org-entry-get nil "TIMESTAMP")
>
> always return nil, even if a timestamp exists.
>
> Strangely, the org-entry-properties alist includes values for TIMESTAMP
> and TIMESTAMP_IA.
>
> I tested this by evaluating the expressions in the sample entry below:
>
> --8<---------------cut here---------------start------------->8---
> * TODO Test 💻
> <2009-12-19 Sat>
> [2009-12-19 Sat 17:47]
>
> (org-entry-get nil "TIMESTAMP_IA")
> (org-entry-get nil "TIMESTAMP")
> (org-entry-properties)
> --8<---------------cut here---------------end--------------->8---
The regular expression was not optimal, and if there was a horizontal
rule, search would not start from the beginning of the buffer but from
after the rule!
Samuel Wales writes:
> I found three places where the lowercase version of a todo
> kw is treated specially in the latest org. For example,
>
> * todo this is lowercase
>
> First, in the agenda, they have a special face.
>
> Second, when inserting an id link, they are removed.
>
> Third, when printing the olpath, they are removed. To
> reproduce, place point at bol on 5 and press the spacebar.
> I expect todo to be in the olpath, but it is not.
>
> Thanks.
>
>
> Samuel
>
>
> * 1
> *** 2
> ***** here are some keywords i like
> ******* todo
> ********* 5
When an agenda custom command has an empty string as MATCH element, so
far this would lead to a meaningless search using an empty matcher.
Now and empty (or white) string will be interpreted just like a nil
matcher, i.e. the user will be prompted for the match.
David Maus writes:
> Just realized that there a lot of broken links in the published
> version of Worg. Seems like something went totally wrong with the
> export to html. For instance:
>
> http://orgmode.org/worg/
>
> "The main resources"
>
> The link to the official page reads http:/g and leads to
> http://orgmode.org/worg/g
>
> -or-
>
> http://orgmode.org/worg/org-contrib/org-protocol.php
>
> "Firefox"
>
> As of March 2009 Firefox users follow the steps documented on
> http:l. Here is a summary: ...
>
> the link reads "http:l" and leads to
> http://orgmode.org/worg/org-contrib/l
>
> And so on.
>
David Maus writes:
> When `org-previous-item' is called on an item with nothing above it
> Orgmode enters an infinite loop. The reason is that
> `org-previous-item' searches for non-empty lines by moving point up
> line by line and if there is nothing above an item point gets stuck on
> begin of buffer.
>
> example.org
> ,----
> |
> | - Item
> `----
>
> Move point on Item, M-x org-previous-item RET and Orgmode enters the
> infinite loop.
>
> Attached patch adds a conditional clause to `org-previous-item' that
> leaves the search loop if point reaches beginning of buffer.
Daniel S. Sinder writes:
> Here's an "odd" problem when I call org-archive-subtree with a
> prefix argument. It seems that DONE subtrees are not found if
> I'm using odd level headlines. I've tried this minimal test
> case:
>
> ---- begin: test case 1 ----
> #+STARTUP: hidestars odd
>
> * DONE Project 1
> *** DONE Task 1.1
> *** DONE Task 1.2
> ---- end: test case 1 ----
>
> If I put the cursor on the level-1 headline and do C-u C-c C-x
> C-s, I am not prompted if I want to archive the level-3 children.
> However, if I remove 'odd' from the STARTUP line and move the
> level 3 headlines to level 2, so I have this:
>
> ---- begin: test case 1 ----
> #+STARTUP: hidestars
>
> * DONE Project 1
> ** DONE Task 1.1
> ** DONE Task 1.2
> ---- end: test case 1 ----
>
> then a repeat of the same command (C-u C-c C-x C-s) correctly
> asks if I want to archive the two level-2 headlines.
>
> I've removed my personal customizations and the problem does not
> go away.
Paul Griepentrog writes:
> Every once in a while I use org-mode in a buffer that is not
> associated with a file... and then org-goto gets confused. To repeat:
>
> BUFFER-NO-FILE
> ---------------
> * One
> - a
> * Two
> - b
> ---------------
>
> M-x org-mode
> C-c C-j
> org-get-refile-targets: Wrong type argument: stringp, nil
>
> [...]
>
> This patch fixes it:
Julien Barnier writes:
> I recntly noticed that in some specific cases, the final '}' was
> esacped when exproting an emphasis element to LaTeX.
>
> For example, the following element :
>
> /éaa/
>
> Is exported to :
>
> \emph{éaa\}
>
> This does not append if the string begins with a space or if it
> is ASCII-only. For example, the followig strings are exported
> correctly :
>
> /aaa/
> /ééé/
>
> I don't understand why the problem only occurs with non-ASCII chars,
> but I think that the regexp to protect added special chars in the
> org-export-latex-fontify function is missing a '?' in the
> beginning. Tha attached patch corrects it.
Bernt Hansen writes:
> ,----[ test.org ]
> |
> | * Main task
> | ** DONE Task 1
> | ** DONE Task 2
> | ** TODO Task 4
> | ** TODO Task 3
> | ** TODO Task 5
> | * Next task
> `----
>
> Put the point on * Main Task
> C-x n s to narrow to subtree
> C-c C-v to show active TODOs
> Put point on TODO Task 4
> M-down arrow
> M-up arrow
>
> generates
>
> Debugger entered--Lisp error: (error "before first heading")
Nicolas Girard writes:
> My point was, in the following two examples, the empty lines right
> before "C" should be preserved in the LaTeX output.
>
> Cheers,
> Nicolas
>
> #===
> - A2
> - B2
>
> C
> #===
>
>
> #===
> - A3
> - B3
>
>
> C
> #===
Add a variable org-complete-tags-always-offer-all-agenda-tags, which makes org
complete all tags from all agenda files if non-nil. Usually, setting it
locally to t in org-remember buffers is most convenient.
