* doc/org.texi (Literal examples in ODT export):
htmlfontify.el in Emacs-24.1 now supports fontification. So
ODT source blocks will be fontified by default.
(Evaluating code blocks, Evaluating code blocks):
Whitespace-only change.
I started from the 78ec8e commit then cherry-picked and squashed
commits that have been done in master since then, except the bad
commits that overwrote the tree (in master) with the tree in maint.
This commit also bumps the version number to 7.8.06.
The only "fix" that was made between 78ec8e and the previous commit
is e0072f which has been reported to break stuff.
doc/org.texi (section on Special Properties) Clarified that ITEM refers
to the headline of the entry not the whole entry text.
(section on Matching Tags and Properties) Clarified that matching on
the value of ITEM special property is not currently supported,
and added a footnote about a partial workaround.
Also added missing -if suffix to references to org-agenda-skip-entry-if.
TINYCHANGE
This fixes a wrong merge that should not have happened:
commit 7e903a merges the master branch into the maint branch,
while we really want to keep the maint branch a bugfix-only
branch.
This commit reverts back the maint branch to its state before
merging the master branch. From there, we will fix remaining
problems with the maint branch (e.g. copyright issues) then
release this maint branch as Org-mode 7.8.05.
2012-01-17 Jambunathan K <kjambunathan@gmail.com>
* etc/styles/OrgOdtContentTemplate.xml
(OrgIndentedSection-Level-*): New section styles. These
sections are indented to the same level as the corresponding
list entries. These sections hold tables that occur within a
list.
(OrgTable): Increased relative width from 90% to 96% for
aesthetic reasons.
* lisp/org-odt.el (org-odt-table-indentedp): New variable
(org-odt-begin-table): Modified. If the table is within a
list, temporarily leave the list and begin an indented section
before emitting the table.
(org-odt-end-table): Modified. If the table was within a
list, close the indented section and re-open the list
immediately after ending the table.
(org-odt-continue-list, org-odt-discontinue-list): Helper
routines to temporarily discontinue and continue a list.
(org-odt-list-stack-stashed): New variable to hold the state
of a pending list.
(org-odt-begin-list, org-odt-begin-list-item)
(org-odt-end-list-item): Modified. Handle nitty-gritties for
continuing a list and list item.
(org-odt-section-count): New variable that keeps track of
section count. Used in conjunction with naming of sections.
(org-odt-begin-section, org-odt-end-section): New defuns.
(org-odt-init-outfile): Initialize
`org-odt-list-stack-stashed' and `org-odt-section-count'.
* lisp/org-lparse.el (org-lparse-list-item-count): Removed. Was a
superfluous variable.
(org-lparse-list-level): Removed. Now derived from
`org-lparse-list-stack'.
(org-lparse-list-stack): New. List that records the list
types - ordered, unordered or descriptive - in the following
order: self, parent, grand-parent etc.
(org-do-lparse): Added, removed above let-bound vars.
Disallowed regular tables within list-table block.
(org-lparse-begin-list, org-lparse-end-list)
(org-lparse-begin-list-item, org-lparse-end-list-item):
Propagate above changes.
OpenDocument doesn't permit tables to occur in the middle of a
list. Use list continuations and indented sections to typeset
indented tables.
Fixes the following bug:
http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00515.html
Add support for indented tables in ODT export
2012-01-20 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-format-textbox): Honor user-specified
width in captioned images.
Fix for bug reported here:
http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00641.html
Honor user-specified width in captioned images
2012-01-23 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-table-style-format): New. Template for
auto-generated table styles.
(org-odt-automatic-styles, org-odt-object-counters): New
variables.
(org-odt-add-automatic-style): New function.
(org-odt-write-automatic-styles): New function. Create
automatic styles for tables that have custom :rel-width.
(org-odt-begin-table): Parse attributes specified with
"#+ATTR_ODT: " option and use it to create an automatic table
style.
(org-odt-save-as-outfile): Call
`org-odt-add-write-automatic-styles'.
(org-odt-init-outfile): Init newly add variables.
(org-odt-section-count): Remove it.
(org-odt-begin-section): Use `org-odt-add-automatic-style' to
generate an automatic section name.
Customize table width using :rel-width option. For example,
to create a table of width 60% use:
#+attr_odt: :rel-width 60
| A | B |
|---+---|
| | |
org-odt.el: Put table width under user-control
2012-01-23 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-label-styles): Add a new style.
(org-odt-category-map-alist): Use it.
Andreas Leha writes:
The following snippet exports correctly to LaTeX and to html, but
produces the text "Figure Figure" in odt.
Could the behaviour be synchronized?
=== example.org ==========================
* Test ref
plot(1:10, 1:10)
Here is a reference to Figure \ref{fig:bar}
=== example.org ==========================
org-odt.el: Make label references consistent with LaTeX export
2012-01-24 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-entity-frame-styles): Add frame params
for images that are anchored as character.
(org-export-odt-format-image): Handle new anchor type
"as-char".
(org-export-odt-default-image-sizes-alist): Misc. change.
(org-export-odt-format-formula): Misc. change.
With this change, one can use the below snippet to produce
images that are laid out side-by-side.
#+ATTR_ODT: :width 7 :height 7 :anchor as-char
#+header: :file foo.png
[[./foo.png]]
#+caption: bar
#+ATTR_ODT: :width 7 :height 7 :anchor as-char
#+header: :file bar.png
[[./bar.png]]
See http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00677.html.
org-odt.el: Allow images to be anchored as characters
2012-01-24 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-export-odt-format-formula): Use :style
property to specify custom table styles.
Continuation of the earlier commit titled: "Put table width
under user-control".
org-odt.el: Fix regression in typesetting of MathML formulae
2012-01-27 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-odt-format-preamble): Don't insert TOC here.
Delay it till the end of export.
(org-odt-begin-document-body): Make a note of the default
position of TOC in `org-lparse-dyn-first-heading-pos'.
(org-odt-insert-toc): Insert TOC as directed by
[TABLE-OF-CONTENTS] line or at the default position.
(org-odt-end-export): Call `org-odt-insert-toc'.
Fix for the following bug:
http://lists.gnu.org/archive/html/emacs-orgmode/2012-01/msg00974.html
org-odt.el: Honor "[TABLE-OF-CONTENTS]" directive
2012-01-27 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Fix earlier commit
2012-01-30 Jambunathan K <kjambunathan@gmail.com>
* OrgOdtStyles.xml (OrgTitlePage): New page style. Include no
footer. Use "OrgFrontMatterPage" for the following page.
(OrgFrontMatterPage): New page style. Include a footer that
displays page numbers in Roman style. Use mirrored pages.
Use "OrgFrontMatterPage" for the following page.
(OrgPage): New page style. Include a footer that displays
page numbers. Use mirrored pages. Use "OrgPage" for the
following page.
(OrgFirstPage): New page style. Include a footer that
displays page numbers. Right page only. Use "OrgPage" for
the following page.
(Standard): Modify to include a footer that displays page
numbers. Use mirrored pages. Use "Standard" for the
following page.
None of the above page styles have a header.
The newly added page styles are not used as yet.
org-odt.el: By default, include page numbers in the page footer
2012-01-31 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Do `clear-image-cache' before `create-image'
2012-02-03 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-lparse.el (org-lparse-do-convert): Replace
`call-process' with `shell-command-to-string'.
* lisp/org-odt.el (org-export-odt-convert-processes): Add a new
converter which depends solely on LibreOffice and nothing
else.
(org-export-odt-convert-process): Make the above native
converter the default.
Thanks to Giles for introducing the "--convert-to" option of
soffice.exe. The option seems to be a fairly recent
development.
http://imperfectsoftware.blogspot.in/2012/01/one-of-my-less-enjoyable-tasks-is-to.html
With this change, one can export to pdf via odt by a simple
(setq org-export-odt-preferred-output-format "pdf")
There is no need to install additional converters.
org-odt.el: Make LibreOffice the default converter
2012-02-09 Jambunathan K <kjambunathan@gmail.com>
* org-odt.el (org-export-odt-convert-capabilities): Change the
default value.
See http://lists.gnu.org/archive/html/emacs-orgmode/2012-02/msg00293.html.
Offer "docx" as an option in `org-export-odt-preferred-output-format'
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Fix indentation
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
org-odt.el: Tag all custom variables with Emacs version
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
* lisp/org-odt.el (org-export-odt-convert-processes): Re-define
(org-export-odt-convert-capabilities): Fix an accidental
regression.
* lisp/org-lparse.el (org-lparse-do-convert): Related change.
Simplify definition of `org-export-odt-convert-processes'
2012-02-12 Jambunathan K <kjambunathan@gmail.com>
Retire support for BasicODConverter
2012-02-14 Jambunathan K <kjambunathan@gmail.com>
* org-odt.el (org-export-as-odt-to-buffer)
(org-replace-region-by-odt, org-export-region-as-odt): Remove
these interactive functions. They are of questionable value.
org-odt.el: Remove interactive functions of questionable value
2012-02-15 Jambunathan K <kjambunathan@gmail.com>
Improve converting from ODT to other formats
2012-02-15 Jambunathan K <kjambunathan@gmail.com>
* org-odt.el (org-export-odt-image-size-probe-method)
(org-odt-do-image-size): Use imagemagick preferentially to
determine image sizes.
See http://lists.gnu.org/archive/html/emacs-orgmode/2012-02/msg00288.html
org-odt.el: Use imagemagick to determine image sizes
2012-02-16 Jambunathan K <kjambunathan@gmail.com>
* org.texi (Top, OpenDocument Text export)
(ODT export commands, Extending ODT export)
(Images in ODT export, Tables in ODT export)
(Configuring a document converter): Add or Update.
org.texi: Update ODT section
* doc/org.texi: Decapitalize file name in references to Calc manual.
On a case sensitive file system the references from the HTML Org
manual (e. g. the link href="Calc.html#Embedded-Mode" or
href="../Calc/Embedded-Mode.html#Embedded-Mode") to the HTML Calc
manual (e. g. the file calc.html or calc/Embedded-Mode.html) do not
match.
* doc/org.texi (MobileOrg): Change the wording to reflect that the
Android Version is no longer just the little brother of the iOS version.
* doc/orgguide.texi (MobileOrg): Change the wording to reflect that the
Android Version is no longer just the little brother of the iOS version.
* org.el (org-set-regexps-and-options): Set the value of
`org-drawers' by adding the value of the infile #+DRAWERS
option to that of the existing `org-drawers'.
* org.texi (Drawers): Clearly states that #+DRAWERS will add
drawers to the one originally listed in `org-drawers'.
