Carsten Dominik <carsten.dominik@gmail.com> writes:
> On Oct 29, 2010, at 5:22 AM, Jambunathan K wrote:
>
>> "Thomas S. Dye" <tsd@tsdye.com> writes:
>>
>>> Aloha Jambunathan K.,
>>>
>>> Yes, thanks for that suggestion. It should work on your example, but
>>> it breaks external links, like this:
>>>
>>> \hyperref[http://www.ctan.org/tex-archive/macros/latex/contrib/koma-script/
>>> ]{KOMA-script}
>>>
>>> External links require the \href{}{} command. It appears the LaTeX
>>> export process no longer distinguishes internal and external links,
>>> as
>>> I believe it used to do.
>>>
>>
>> This is the problematic commit:
>>
>> commit f5918bdcc0
>> parent df5894cdcb
>> Date: Sun Oct 17 08:29:51 2010 +0000
>>
>> LaTeX export: use org-export-latex-hyperref-format
>
> I have just reverted this commit.
>
> - Carsten
>
Looks like time to change the variable name which is actually confusing.
Since href and hyperref are two different things, I renamed the existing
`org-export-latex-hyperref-format' variable as
`org-export-latex-href-format' and introduced a new one
`org-export-latex-hyperref-format'.
* org-latex.el (org-export-latex-hyperref-format): New option.
(org-export-latex-href-format): Renamed the existing variable
`org-export-latex-hyperref-format' as `org-export-latex-href-format'
(org-export-latex-links): Use `org-export-latex-hyperref-format' and
`org-export-latex-href-format'
Thanks and Regards
Noorul
>>
>> * lisp/org-latex.el (org-export-latex-links) : Replaced hard coded
>> hyperref format with custom
>> variable `org-export-latex-hyperref-format'
>>
>> Note that href is not same as hyperref.
>>
>> Jambunthan K.
>>
>>
>>> All the best,
>>> Tom
>>>
>>> On Oct 28, 2010, at 3:30 PM, Jambunathan K wrote:
>>>
>>>>
>>>> Thomas
>>>>
>>>> There was a hint at possible solution (or atleast a partial
>>>> solution) in
>>>> my original post. Did you try it before jumping in to rough waters
>>>> or
>>>> digging deeper?
>>>>
>>>> Do
>>>>
>>>> ,----
>>>> | M-x customize-variable RET org-export-latex-hyperref-format'
>>>> `----
>>>>
>>>> so that your .emacs has an entry like this
>>>>
>>>> ,---- [.emacs]
>>>> |
>>>> | (custom-set-variables
>>>> | '(org-export-latex-hyperref-format "\\hyperref[%s]{%s}"))
>>>> |
>>>> `----
>>>>
>>>> The above setting solves the problem for me with the following
>>>> simple
>>>> Org file.
>>>>
>>>> * Heading1
>>>> Make this section as large as possible so that it fills atleast a
>>>> page.
>>>>
>>>> * Heading2
>>>> Links to [[Heading1]]
>>>>
>>>> Jambunathan K.
>>>>
>>>> "Thomas S. Dye" <tsd@tsdye.com> writes:
>>>>
>>>>> On Oct 28, 2010, at 12:35 PM, Nick Dokos wrote:
>>>>>
>>>>>> Thomas S. Dye <tsd@tsdye.com> wrote:
>>>>>>
>>>>>>> On Oct 28, 2010, at 11:01 AM, Jambunathan K wrote:
>>>>>>>
>>>>>>>
>>>>>>> This is a regression. release-7.01h is good. HEAD is bad. I get
>>>>>>> the
>>>>>>> following line with release-7.01h.<
>>>>>>>
>>>>>>> Links to \hyperref[sec-1]{Heading1}
>>>>>>>
>>>>>>> Jambunathan K.
>>>>>>>
>>>>>>> Aloha Jambunathan K.,
>>>>>>>
>>>>>>> Very many thanks for this information. I have Org-mode version
>>>>>>> 7.01trans
>>>>>>> (release_7.01h.880.g7531f). I take it the problem I'm having is
>>>>>>> due to a relatively recent change
>>>>>>> to Org-mode. If there is anything I can do to help isolate the
>>>>>>> problem, please let me know.
>>>>>>>
>>>>>>
>>>>>> Tom,
>>>>>>
>>>>>> If you have the time and the inclination, you might try bisecting
>>>>>> your
>>>>>> way through. Bisecting org-mode problems is actually a very good
>>>>>> way
>>>>>> to
>>>>>> practice because the turnaround time is very small.
>>>>>>
>>>>>> Prerequisites:
>>>>>>
>>>>>> * you have a clone of the org-mode git repository.
>>>>>>
>>>>>> * you have an org test file.
>>>>>>
>>>>>>
>>>>>> Steps:
>>>>>>
>>>>>> * [optional, but it makes me feel a little safer] create a test
>>>>>> branch
>>>>>> and switch to it:
>>>>>>
>>>>>> git checkout -b test-branch master
>>>>>>
>>>>>> * I clean out all the compiled files while doing a bisection: it's
>>>>>> quicker
>>>>>> than regenerating them every time and I don't have to worry (much)
>>>>>> about
>>>>>> emacs loading a wayward .elc file:
>>>>>>
>>>>>> make clean
>>>>>>
>>>>>> * start the bisection and tell git which commit is known good and
>>>>>> which is known bad:
>>>>>>
>>>>>> git bisect start
>>>>>>
>>>>>> # current version is bad
>>>>>> git bisect bad
>>>>>>
>>>>>> # release_7.01h was good - I got the name with ``git tag''
>>>>>> git bisect good release_7.01h
>>>>>>
>>>>>> That checks out a revision half-way in between the bad and good
>>>>>> commits: since
>>>>>> there are about 900 commits in between, you'll be at approx the
>>>>>> 450-
>>>>>> mark and it
>>>>>> should take about 10 bisections to get it down to a single commit.
>>>>>>
>>>>>> * LOOP Now all you have to do is repeat the following steps:
>>>>>>
>>>>>> # since you did ``make clean'' you don't have to worry about .elc
>>>>>> files
>>>>>> # just reload all the .el files.
>>>>>> M-x org-reload
>>>>>>
>>>>>> visit your org test file, export to LaTeX, check for \href/
>>>>>> \hyperref (or
>>>>>> whatever other telltale sign shows badness/goodness).
>>>>>>
>>>>>> # tell git about it
>>>>>> git bisect good *OR* git bisect bad
>>>>>>
>>>>>> This last step will check out another revision and in about 10
>>>>>> repetitions
>>>>>> of the loop, you are done.
>>>>>>
>>>>>> * Tell git you are done, so it can clean up:
>>>>>>
>>>>>> git bisect reset
>>>>>>
>>>>>> Theoretically, you could do all of this in your master branch
>>>>>> without
>>>>>> creating a test-branch and this last step will reset everything to
>>>>>> the
>>>>>> way it was before ``git start''.
>>>>>>
>>>>>> * Post the offending commit to the list.
>>>>>>
>>>>>> * Get back to your master branch:
>>>>>>
>>>>>> git checkout master
>>>>>>
>>>>>> * If you created a test-branch, clean it out:
>>>>>>
>>>>>> git branch -d test-branch
>>>>>>
>>>>>> * [Optional] Recreate your .elc files and reload them:
>>>>>>
>>>>>> make
>>>>>> M-x org-reload
>>>>>>
>>>>>>
>>>>>> And that's it: a half-hour of fun and games. Unless of course, you
>>>>>> hit upon a revision that is neither good nor bad (in the above
>>>>>> restricted
>>>>>> sense): you might get some other problem that prevents you from
>>>>>> being
>>>>>> able to answer. That might or might not be easy to resolve, so
>>>>>> I'll
>>>>>> leave that as an advanced topic (truth be told, I came up against
>>>>>> this
>>>>>> situation a couple of days ago and I didn't know how to proceed:
>>>>>> so
>>>>>> it's ignorance more than anything else that prevents me from
>>>>>> saying
>>>>>> anything more).
>>>>>>
>>>>>> If you want to try, I'd be happy to answer questions - I might try
>>>>>> the
>>>>>> bisection later on tonight myself in any case. And btw, this is of
>>>>>> course archeology of a different (and much easier) kind, so I
>>>>>> imagine
>>>>>> you'll take to it like a fish in water :-)
>>>>>>
>>>>>> HTH,
>>>>>> Nick
>>>>>
>>>>> Hi Nick,
>>>>>
>>>>> Irresistible hook at the end there. I wish this stuff were as easy
>>>>> as
>>>>> archaeology is for me. Your instructions are terrific, though.
>>>>>
>>>>> I did hit on a revision that was neither good nor bad:
>>>>>
>>>>> commit 8562273b27
>>>>> Author: Eric Schulte <schulte.eric@gmail.com>
>>>>> Date: Sat Oct 16 13:21:47 2010 -0600
>>>>>
>>>>> ob-ref: don't forget arguments to referenced code blocks
>>>>>
>>>>> * lisp/ob-ref.el (org-babel-ref-resolve): bringing the referent
>>>>> arguments back to their params before evaluation
>>>>>
>>>>> This one puts these lines in *Messages* when I export to LaTeX
>>>>>
>>>>> executing Org code block...
>>>>> if: Symbol's value as variable is void: result-type
>>>>>
>>>>> I tried using different commits for the initial git bisect good,
>>>>> hoping that would skip by the problem, but this one appears to have
>>>>> stuck around a while. My other two tries both ended with this same
>>>>> error, but with different commits.
>>>>>
>>>>> I'm not sure what to do next. This problem isn't yielding to my
>>>>> archaeo-logic. :)
>>>>>
>>>>> All the best,
>>>>> Tom
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
This is the Emacs Org project, an emacs subsystem for organizing your life
The homepage of Org is at http://orgmode.org
This distribution contains:
README
This file.
README_DIST
The README file for the distribution (zip and tar files)
README_GIT
Information about the git repository and how to contribute
to Org-mode development.
lisp/
Directory with all the Emacs Lisp files that make up Org.
doc/
The documentation files. org.texi is the source of the
documentation, org.html and org.pdf are formatted versions of it.
contrib/
A directory with third-party additions for Org. Some really cool
stuff is in there.
ORGWEBPAGE/
Directory with the source files for the orgmode.org web page.
ChangeLog
The standard ChangeLog file.
Makefile
The makefile to compile and install Org, and also for maintenance
tasks.
request-assign-future.txt
The form that contributors have to sign and get processed with the
FSF before contributed changes can be integrated into the Org
core. All files in this distribution except the CONTRIB directory
have copyright assigned to the FSF.
EXPERIMENTAL
Experimental code, not necessarily FSF copyright.
5324802839